Starting The Machine; Shutting Off The Machine - Toro Grandstand 18562 Operator's Manual

Revolution mower with 48in or 60in turbo force cutting unit
Table of Contents

Advertisement

judgment when performing this evaluation.
Changes in the terrain, such as moisture, can
quickly affect the operation of the machine on
a slope.
Operate across slopes, never up and down. Avoid
operation on excessively steep or wet slopes.
Identify hazards at the base of the slope. Do
not operate the machine near drop-offs, ditches,
embankments, water, or other hazards. The
machine could suddenly roll over if a wheel goes
over the edge or the edge collapses. Keep a safe
distance (twice the width of the machine) between
the machine and any hazard. Use a walk-behind
machine or a handheld tool to operate in these
areas.
Avoid starting, stopping, or turning the machine on
slopes. Avoid making sudden changes in speed or
direction; turn slowly and gradually.
Do not operate a machine under any conditions
where traction, steering or stability is in question.
Be aware that operating the machine on wet
grass, across slopes or downhill may cause the
machine to lose traction. Loss of traction to the
drive wheels may result in sliding and a loss of
braking and steering. The machine can slide even
if the drive wheels are stopped.
Remove or mark obstacles such as ditches, holes,
ruts, bumps, rocks or other hidden hazards. Tall
grass can hide obstacles. Uneven terrain could
overturn the machine.
Use extra care while operating with accessories or
attachments. These can change the stability of
the machine and cause a loss of control. Follow
directions for counterweights.
If you lose control of the machine, step away from
the direction of travel of the machine.

Starting the Machine

1.
Stand on the platform.
2.
Turn the key switch to the O

Shutting Off the Machine

CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
1.
Disengage the PTO.
2.
Move the motion-control levers outward to the
P
position.
ARK
Note:
The electric brake will engage
automatically.
3.
Turn the key switch to the O
remove the key.
19
position.
N
position and
FF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand 18564

Table of Contents