Loewe Xelos 46 Operating Instructions Manual page 93

External devices
Playing the sound over active loudspeakers
➠ External speakers has been selected.
OK continue to Adjust speaker level.
SOUND COMPONENTS WIZARD
You hear a sound from every speaker one after another.
But you can also select the speakers manually with the
menu control buttons up/down. Set the volume for the
respectively active speaker shown in blue so that you get
approximately the same volume impression from all the
speakers.
SOUND COMPONENTS
Adjust speaker level
0 dB
Proceed
OK
Adjust the volume for each speaker.
Select speakers manually.
➠ For balanced audio reproduction all speakers should be
set at the same volume level. A noise signal will be
reproduced automatically on each speaker in succession.
Adjust every speaker to equal perceived volume from
your listening position.
OK End the wizard.
Front Front
left right
L
R
0dB
Preceding/next loudspeaker
TV set
AUDIO OUT
L/R
Connection of active speakers to the TV set
Playing the sound over TV speakers and subwoofer
➠ External speakers has been selected.
OK continue to Connect subwoofer.
OK confirm.
0dB
Adjust speaker level:
OK confirm.
Subwoofer phase:
Back
OK Confirm setting and close wizard.
Subwoofer
Select yes,
Set the subwoofer level as desired.
Test both values (0º and 180º) and choose the one
that enables you to hear the bass playback more
clearly.
TV set
Connection of a subwoofer to the TV set
AUDIO OUT
L/R
93 -