Table of Contents
Advertisement
Electronic Programme Guide
Paging through the programme list
P+/P– Page backwards / forwards.
In the entries for Date and Time, you will see changes in
time as well as in date when paging. Scrolling in the
programme list is also possible when the selection is at
the top of the specifications.
Calling additional information about the programmes
➠ Brief information about many programmes is displayed
below the programme list of the broadcasts.
You can call detailed information with the TEXT button if
this function is offered by the TEXT icon in the lower left.
The symbol explanations are described on page 37.
Programming a recording for a recorder
➠ The selection is in the lower programme list,
if not, press the blue button.
➠ The displayed page of the programme list includes the
desired programme, otherwise browse to it or suitably
limit via the specifications in the lower section.
Mark the desired programme.
RECORD button: Timer data is called up.
Change or confirm timer data if necessary (see page 75).
Then a red dot will be displayed in front of this programme
as an identification.
RECORD button: Deletes the already programmed record-
ing of the red marked programme from the timer.
- 46
Configuring EPG
Start the EPG menu
➠ EPG mode is started,
if not, press the EPG button.
MENU: Call the EPG menu.
EPG MENU
Station selection
Explanations of setting possibilities in the EPG menu:
In the station selection you can determine for which
Station
selection
station in the programme guide information is to be dis-
played. Programme information will only be displayed in
the EPG for stations that you mark with
You can use the coloured buttons to mark the selected
station, all stations, or just the stations in all favourites
lists.
Because of the large number of receivable DVB-S stations
you should restrict the station selection. This reduces
the data entry time and increases the clarity in the EPG.
Marking the stations according to reception ranges:
Digital terrestrial stations (DVB-T).
Digital cable stations (DVB-C).
Digital satellite stations (DVB-S).
When yes is set, the switched off TV switches on auto-
Switch on TV
matically from the standby mode at the beginning of a
when marked
set programme. A screen message appears when switch-
ing on. If this is not confirmed within 5 minutes with the
OK button, the TV switches back off automatically for
safety reasons.
Sorting
The programmes can be sorted either according to their
start times (chronologically) or according to stations (cor-
responding to station list).
Switch on TV when marked
Sorting
OK
here.
Advertisement
Table of Contents
