Loewe Xelos 46 Operating Instructions Manual page 27

Initial installation
Setting options for the satellite system
(other communal installation):
Select single
INITIAL INSTALLATION (DVB-S)
satellite
Select single satellite
Astra1 19,2°E
Hot Bird 13°E
Astra2 28,2°E
Astra3 23,5°E
Atlantic Bird1 12,5 °W
Atlantic Bird2 8°W
Atlantic Bird3 5°W
Eurobird1 28,5°E
Eurobird 9A 9°E
Eutelsat W2 16°E
Eutelsat W3A 7°E
Eutelsat W4 36°E
Proceed
OK
Select satellite,
OK Proceed.
LNB
INITIAL INSTALLATION (DVB-S)
settings
LNB frequency
Supply voltage
Proceed
OK
Select and adapt settings.
Normally, you do not need to change the values for high
LNC
and low band, unless the LNC (LNB) of your satellite
frequency
system uses a different oscillator frequency (important
for the frequency display).
Supply voltage If your set is connected to a single-cable system without
external voltage supply, you can connect the antenna
supply (13V or 18V / max. 450mA).
OK Proceed.
(with Setting options for all types of reception on
page 28).
Hellas Sat2 39°E
OK
Hispasat 30°W
Intelsat10 02 1°W
Intelsat901 18°W
Nilesat 7°W
Pan Am Sat 43°W
Sirius2/3 5°E
Telekom2C 5°W
Telekom2D 8°W
Telestar12 12,5°W
Thor2/3 0,8°W
Türksat 42°E
9750 MHz
off
Back
continued on next page
27 -