Loewe Xelos 46 Operating Instructions Manual page 71

Digital Recorder
Archive recording
➠ To record encoded programmes, please also read the instructions on
pages 84 and 85.
➠ Recording of analogue stations is not possible.
You can play back a pre-recorded programme from the archive whilst
another TV programme is being recorded into the archive.
➠ If several USB storage devices are connected, the first device recognised
will be used for the recording. If storage devices are plugged into both
the TV set's USB ports at the same time, the storage device plugged
into the side port will be used for recording. If several storage devices
are connected to the TV set at the same time, ensure that the one
you want to use for the recording is plugged into the side USB port.
Record interesting programmes directly into the archive with the RECORD
button. The programme is recorded from the point at which the record-
ing function is selected to its end or to the end of the set recording
time.
Comfortably select your favourite programme for recording, from the
EPG or teletext. The timer overview has room for 50 entries. Watch the
programmes later from the Digital Recorder's archive.
Archive playback
All the recorded programmes can be selected in the archive and played.
During archive playback, another programme can be recorded into the
archive.
There are three different speeds for winding and rewinding films.
You can fast forward and rewind during a film at the touch of a button.
The jump width is adjustable (see page 72).
The Smart Jump function also ensures that the jump width is halved
each time the jump direction is changed or doubled after three jumps
in the same direction (max. 8 minutes). This way you can quickly find
a certain spot of the recording.
Technical information
The TV set uses the hard disk file system FAT32. The file system NTFS is
not supported. PCs with the operating system Microsoft Windows only
support a total hard disk volume of 32GB when formatting on FAT32.
Larger hard disks are automatically reduced in their capacity by this.
Format external USB disks that you wish to use with the TV set via the
TV menu Settings Miscellaneous
page 84), so as to be able to utilise the hard disc capacity.
Switching off the TV set with the mains switch during operation or an
inadvertent disruption to the power supply (e.g. power failure) can cause
damage to the hard disc file system and hence loss of the recorded
broadcasts. Always first switch your TV set to standby mode (press On/
Off button on the remote control or switch-off button in the middle
of the operating eye on the TV set), before switching off at the mains
switch. Do not disconnect the external hard drive from the TV set during
recording under any circumstances.
However, if unexpected problems occur when operating the hard disc,
formatting the hard disc may rectify this. Refer to the instructions on
page 84.
Format external hard disk (see
71 -