Table of Contents
Advertisement
Initial installation
Selecting
Depending on which antenna(s) was (were) selected, the
antennas
appropriate settings are called later during the routine.
(continued)
OK proceed.
Subtitle and
INITIAL INSTALLATION
Subtitle and audio languages (DVB)
audio
Favoured subtitle language
languages
Alternative subtitle language
Favoured audio language
(DVB)
Alternative audio language
Proceed
OK
Select desired languages and alternative
languages for subtitles and audio for DVB
programmes (see page 53).
OK Proceed.
Setting options for DVB-T reception:
English
...
OK
German
English
German
Back
Supply voltage
If you have not selected a DVB-T antenna in the antenna
selection: Continue with setting options for DVB-C recep-
tion on page 24.
Settings
INITIAL INSTALLATION (DVB-T)
Scrambled stations
Search method
Proceed
OK
Select and adapt settings for DVB-T reception.
Encrypted
You can state whether coded stations are to be searched
stations
for in the search/update.
scrambled stations.
be received in connection with a CA module and the
appropriate Smart Card. Handling of the CA module is
described on page 55.
If a CA module with a SmartCard is already plugged in for
the station search, all the stations which this module can
descramble are also saved when no is preset.
Search
If you want to run the station search independently of
method
the channel grid, select frequency search for the search
method.
OK Proceed.
INITIAL INSTALLATION (DVB-T)
Antenna
Supply voltage
no (0V)
Proceed
OK
Select supply voltage no / yes.
Use a DVB-T antenna that requires a supply voltage
(active antenna) and which is not already supplied
via a power adapter, then select yes (5V) for the
antenna's power supply.
How to align your DVB-T antenna is described on
page 30.
OK Proceed.
no
yes
Channel search
Select
yes
to save all found
However, these stations can only
yes (5V)
OK
Back
23 -
Advertisement
Table of Contents
