Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 Operating Instructions Manual
Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 Operating Instructions Manual

Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 Operating Instructions Manual

Table of Contents

Advertisement

Operating instructions

TV
– Xelos A 37 Full-HD + 100
– Xelos A 32 Full-HD + 100

Advertisement

Table of Contents
loading

Summary of Contents for Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100

  • Page 1: Operating Instructions

    Operating instructions – Xelos A 37 Full-HD + 100 – Xelos A 32 Full-HD + 100...
  • Page 2: Table Of Contents

    Select station ....................18 Rotating the TV set (upgradable interface).............57 Select video source ..................19 PhotoViewer ....................58 Adjusting the sound ..................20 Operating Loewe equipment .................60 Adjusting the picture ..................22 Troubleshooting ..................62 Operation without remote control ..............23 Technical data ..................64 Button functions ...................24 General data ....................64...
  • Page 3: Remote Control - Tv Functions

    Remote control – TV functions Switch on / (page 20) ............. Sound off/on switch off to standby mode ........(page 12) (page 60) ....LED display for current operating mode Switch over to radio mode ......(page 12, 36) (page 11, 60) ........Switch over to TV mode Switch over to operate DVD player ......(page 60) (page 60) ........
  • Page 4: Control Unit Front Side Of The Device

    Control unit front side of the device Button M: Call the menu in the menu: up/down  Display: = Standby On/Off button: = Operation Switch on from the standby mode = Operation without on-screen display Switch off from the standby mode (Radio, EPG data capture or timer recording) Button –...
  • Page 5: Connections Rear Side Of The Device - Xelos A 32

    Connections rear side of the device – Xelos A 32 Factory setting: AV2: DVD recorder You can change this during the Common Interface initial installation (page 12) or in (CI-Slot) the connection wizard (page 44). Headphones Before you connect other devices connection or make any changes, please start S-VHS connection (AVS)
  • Page 6: Connections Rear Side Of The Device - Xelos A 37

    Connections rear side of the device – Xelos A 37 Factory setting: AV2: DVD recorder You can change this during the Common Interface initial installation (page 12) or in (CI-Slot) the connection wizard (page 44). Headphones Before you connect other devices connection or make any changes, please start S-VHS connection (AVS)
  • Page 7: Welcome

    (DVB-S) with a upgrade. All the station names, programme contents and the illustrated photos in The Loewe Digital + HD 100 platform in sets with Digital Recorder even this operating manual are examples. enables dual reception of uncoded stations of DVB-T, DVB-C and DVB-S.
  • Page 8: Operating Convenience With Wizards

    Welcome Assist + Operating convenience with wizards You can select the most important operating modes directly with the This TV set offers user prompting with wizards that take you through the Assist + menu (ASSIST button). Selectable modes are: TV, Radio digital, settings step-by-step.
  • Page 9: For Your Safety

    For your safety For your own safety and to prevent unnecessary damage to your device, Power supply read and comply with the following safety instructions: The wrong voltage can damage the set. This equipment must only be connected to a mains power supply which has the same voltage and Proper use and environmental conditions frequency as that specified on the rating plate;...
  • Page 10: Environmental Protection

    64). If you want to save even more energy then switch the device Only use original accessories such as Loewe stands if possible (see Ac- off with the mains switch. However note that in this case, EPG (Electronic cessories on page 65).
  • Page 11: Initial Installation

    220-240V~ Press the TV button. SAT2 50/60Hz See page 60 to find out how to operate other Loewe equipment. Connecting the TV set Connections on the back of the set (see also pages 5 and 6). Connecting to the mains Replace the cover over the connections.
  • Page 12: Turning The Set On/Off

    Initial installation Turning the set on/off First installation wizard Switching the TV set to standby mode Initial installation after switching on for the first time This wizard starts automatically after the set is switched on for the first Activate the mains switch on the back/bottom of the set. time, however it can also be called later manually in the TV index, see The display in the control panel on the front of the set Repeat initial installation on page 17.
  • Page 13 Initial installation Explanations of the setting possibilities, including the upgradeable Logical In various countries, digital stations (DVB-T, DVB-C) are Channel transmitted with a preset channel number per station, satellite reception: Number known as “Logical Channel Numbers“ – “LCN“. In this Energy Decide how energy efficiently you want to operate your case the preset channel numbers are adopted as station...
  • Page 14: Positioning/Aligning The Dvb-T Antenna

    Initial installation Start search Start the automatic station search with OK. Positioning/aligning the DVB-T antenna The set now searches for TV and DVB radio stations. If you receive one or more DVB-T stations with picture or sound interfer- The stations found in the automatic search are divided into ence, you should change the position and alignment of the antenna.
  • Page 15: Operating Convenience

    Operating convenience General information on menu operation The info display Menus for the individual operating modes (TV, Radio, PIP, EPG, Teletext, The info display shows a content-based info text for each menu item at PhotoViewer and DR archive, if equipped with Digital Recorder) are called the top edge of the screen to aid you in making the settings.
  • Page 16: The Index In The Tv Set

    Operating convenience The Assist + menu The index in the TV set You can start all wizards and many operating functions directly from The most important additional functions of the TV set can be called directly by the Assist + menu. this point.
  • Page 17: Tv Menu - Overview Diagram

    Operating convenience TV menu – Overview diagram TV menu Recording Settings Picture Sound Connections Sound via Recording wizard New devices/modifications Stations Picture adjustment Search wizard Contrast Sound effects Timer list Sound components Manual adjustment Colour intensity Sound adjustment Pre-record time Antenna DVB Change stations Digital Link Plus...
  • Page 18: Daily Operation

    Daily operation Select station With the station list ➠ In normal TV mode, without other displays, no favour- With the keys P+ and P - on the remote control ites selected: P+/P– Station up/down. OK Call Station list. The station display with sound identification is displayed briefly.
  • Page 19: Select Video Source

    Daily operation With the favourites lists Select video source ➠ Please ensure that the appropriate devices have also been registered You can save and call your favourite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After with the connection wizard (see page 44).
  • Page 20: Adjusting The Sound

    The Auro selection is only Setting the volume possible if a Loewe DVD Preceiver Auro is connected. V+/V– Volume louder / quieter. The menu item Sound via does not appear if TV speak-...
  • Page 21 Daily operation Explanations of the sound settings: more ... Loudspeaker/ Selection possibility Mono/Stereo or Sound 1 or Sound Headphone 2 for two-sound broadcasts separately for speakers and sound headphones. Only available with analogue stations. Auto volume Reduces volume differences, e.g. for advertisements that are too loud.
  • Page 22: Adjusting The Picture

    Daily operation Adjusting the picture Presettings / Personal settings for picture adjustment Call TV menu. Call TV menu.  Select Picture,  go to the menu line below.  Select Picture,  go to the menu line below.  Select Picture adjustment,  go to the menu line below.
  • Page 23: Operation Without Remote Control

    Daily operation Explanations of the picture formats: Operation without remote control ➠ The setting options depend on the transmitted picture Changing the station on the TV set content. 16:9 Proportionally correct display of 16:9 broadcasts. + / – Station up/down. 4:3 Proportionally correct display of 4:3 broadcasts.
  • Page 24: Button Functions

    Daily operation Button functions Functions of the coloured buttons in TV mode (Continuation) Green button: Open the Teletext functions menu. Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer and DR archive, if equipped with Digital Recorder) has its own menu and own INFO Teletext functions functions for the coloured buttons.
  • Page 25 Daily operation Status display Additional selection possibilities for DVB stations In the status display additional selection possibilities can be offered for ➠ In normal TV mode, without other displays. specific programmes depending on the DVB programme provider. END: Show/hide status display. ➠...
  • Page 26: Managing Stations

    Managing stations TV stations Explanations of some search settings, including the upgradeable satellite reception: Various options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, Set location Select the country for country-specific defaults and sta- except that the Radio menu is called in Radio mode (see also page 36).
  • Page 27 Managing stations Search for/update stations – handling of new and no longer found stations Search/update station – manual search After the automatic search/update has been completed, the number of Call TV menu. new found stations is displayed.  Select Settings,  go to the menu line below.
  • Page 28 Managing stations Change, delete, move, rename, restore station Rename station ➠ Change station can also be called via the station list (page 18). ➠ Not possible for MHEG-5 stations. ➠ If at least one station is locked the access code must be entered before ➠...
  • Page 29: Put Together / Change Favourites List

    Managing stations Put together / change favourites list Add station to favourites list ➠ All stations (left column) must be selected. Each favourites list can contain up to 99 stations. You can put together If not, change the list with . the favourites lists to suit your requirements (e.g.
  • Page 30: Picture In Picture

    Picture in Picture Picture in Picture (PIP) Swap contents of PIP and main picture ➠ The frame is green, The concurrent display of two different images is referred to as Picture if not, press the green button. in Picture. ➠ The coloured buttons do not work as described below for TV sets Yellow button: Swaps contents of TV picture and PIP picture.
  • Page 31: Configure Picture In Picture (Pip) Mode

    Picture in Picture Configure Picture in Picture (PIP) mode Change position of the PIP small picture ➠ Other than the status line, which may possibly be In the PIP menu you can set the PIP type (Split Screen or Small Picture), the displayed, no other display is shown on the screen: PIP function (Standard PIP or iPIP) and the position of the small picture.
  • Page 32: Electronic Programme Guide

    Electronic Programme Guide Electronic Programme Guide – EPG Adjusting the programme list ➠ The selection is at the top of the specifications, EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed pro- if not, press the blue button.
  • Page 33: Configuring Epg

    Electronic Programme Guide Calling additional information about the programmes Station In the station selection you can determine for which selection station in the programme guide information is to be ➠ Brief information about many programmes is displayed displayed. Only stations with are shown in the EPG.
  • Page 34: Teletext

    Teletext Teletext Additional page selection possibilities Your TV set supports the two operating systems TOP Text and FLOF. 1st possibility: Up to 2,000 pages are stored so that you have quick access. Call overview page 100. Starting and ending Teletext 2nd possibility: Switch Teletext on / off.
  • Page 35: Teletext Menu

    Teletext Programming timer recordings via Teletext Teletext menu ➠ Teletext is started, In the Teletext menu you can activate messages, reveal pages and configure if not, press the TEXT button. the teletext with the Settings menu function. Call the programme pages of the current station. Starting the Teletext menu ➠...
  • Page 36: Digital Teletext (Mheg-5)

    Teletext Digital radio Digital teletext (MHEG-5) Radio mode The TV set can receive digital radio stations via DVB. In the UK or Ireland, the teletext for DVB-T stations is transmitted as per In addition you can play the sound from an external device through the the MHEG-5 standard.
  • Page 37: Epg - Electronic Programme Guide (Radio)

    Digital radio Audio adjustment EPG – Electronic Programme Guide (radio) Call Sound adjustment. For the DVB radio stations you can also use an electronic programme guide, if the station that is currently active supplies data. Other settings as for TV mode (see page 20). Starting and ending EPG Switching the screen on/off ➠...
  • Page 38: Dvb

    Software update Software update wizard The software update can be made via a USB stick or DVB antenna. If you do not make any changes, your TV makes it with the following settings: Update source USB and satellite: ASTRA1 19,2°E (DVB-S) TV base software and DVB software (ASTRA1 19,2°E) Frequency...
  • Page 39: Loading New Software

    If you have adapted the update settings: A bar informs you about the progress of the charging process. Do not switch your set off during this time! OK proceed. This process can take up to 20 minutes depending on the  Select Start update, selected update source.
  • Page 40: Conditional Access Module (Ca Module)

    The CA module and the Smart Card are not part of the TV set's scope of Call TV menu. delivery. They are usually available from your dealer. Loewe provides no guarantee for the functioning of the CA module.  Select Settings,  go to the menu line below.
  • Page 41: Other Settings

    Other settings Parental lock Explanations of setting possibilities in the Parental lock menu: Lock all The TV set is locked immediately the menu is exited. All You can select and set various security options to prevent unauthorised use stations programmes can then only be watched after entering the of the TV set and to protect your children from unsuitable programmes.
  • Page 42: Timer Functions

    Other settings Timer functions Explanations of setting possibilities in the Timer functions menu: Switch off The set switches to the standby mode automatically at This menu offers you convenient alarm services. Programmed alarms are today only the specified time. also active when the TV set has been switched off to standby. If a time is specified which has already passed on the If the TV set switches on from the standby mode by alarm, a screen same day, the set switches off at this time the next day.
  • Page 43: On-Screen Displays

    Other settings On-screen displays Time and date You can select different settings in this menu which affect the on-screen If you receive a station with teletext after switching on the TV, the time displays. and date are recorded automatically. The date may have to be entered manually for some stations.
  • Page 44: Operating Additional Equipment

    Operating additional equipment Connection wizard Select the equipment you want to connect or remove equipment you no longer use in the AV equipment The connection wizard serves to connect accessory equipment optimally selection. to the TV set, make changes to the wiring of the devices or remove mo- Select equipment/connection.
  • Page 45 Operating additional equipment Signal type Digital Link Connection wizard New devices/modifications Plus Transfer of the station list to the Digital Link Plus recorder(s). Signal type at socket AV1 (DVD) Automatic CVBS/YC Transfer (per recorder): 100% CVBS Proceed  Select the signal types of the individual devices one after another where necessary.
  • Page 46: Devices To The Connections Av1/Av2/Avs

    Operating additional equipment Devices to the connections AV1/AV2/AVS Connecting a DVD player to the TV set ➠ DVD player is registered with the connection wizard. Accessory equipment such as DVD players, video and DVD recorders etc. can be connected to the TV set at the Euro-AV sockets AV1 and AV2 Switch off all equipment before connecting.
  • Page 47 Operating additional equipment Connecting a DVD recorder to the TV set Connecting Camcorder/camera ➠ DVD recorder is registered with the connection wizard. ➠ Camcorder/camera is registered with the connection wizard. Switch off all equipment before connecting. Switch off all equipment before connecting. Connect the Euro-AV output of the DVD recorder to the AV2 socket of the TV set.
  • Page 48: Devices To The Hdmi (Dvi) Connections

    Your TV set shows 24p films (see glossary on page 68) which are output With Digital Link HD-capable devices the device by a player connected via HDMI, e.g. Loewe BluTech Vision, automatically name may possibly appear in place of the connection in the original 24p format.
  • Page 49: Devices To The Pc In Connection

    Operating additional equipment Devices to the PC IN connection Playback from the device Call AV selection. You can connect a PC to the PC IN socket for example and thus use the TV screen as a monitor. ➠ When connecting a PC or accessory equipment to the PC IN socket AV selection of the TV set, set one of the following screen resolutions on the PC / COMP.
  • Page 50: Devices To The Component In Connection

    Operating additional equipment Devices to the Component IN connection Playback from the device Call AV selection. DVD players/recorders or a Set-Top-Box with Component Video con- nections can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD- COMPONENT) of the TV set instead of to the EURO-AV sockets. AV selection The connecting cable with three cinch plugs each transfers the picture COMP.
  • Page 51: Sound Components Wizard

    The sound components wizard is preset to playback via TV speakers at the factory. Call TV menu. If a Loewe Preceiver Auro with link cable has been connected to the Select Connections, TV set, you can only select between TV speakers and Auro in the sound  go to the menu line below.
  • Page 52: Connecting Audio Amplifiers

    Operating additional equipment Connecting audio amplifiers Connecting digital audio amplifiers Continuation of the left column above ... The sound component wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with For digital audio transmission: Select yes. different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
  • Page 53: Assignment Of The Digital Audio Input

    RS-232C interface (upgradable interface) AUDIO DIGITAL IN socket on the TV set. You can connect either the Loewe Individual Sound Projector or a home network system of different manufacturers (e.g. AMX, Crestron) to your TV set via the upgradable RS-232C interface.
  • Page 54: The Direct Way To Record

    Operating additional equipment The direct way to record Enter timer data Timer data are displayed after selecting the broadcast you You can programme timer recordings for Digital Recorder or connected want to record. You can change these before confirming. recorders available according to the equipment on the TV set. The record- ing wizard is integrated at several places for programming a recording.
  • Page 55 Operating additional equipment Programming the timer with the timer overview New entry: : Programme timer recording manually All programmed recordings, marked programmes and copy orders ➠ Timer list is opened. listed in the timer overview. You can also programme new recordings, Red button: Call New timer entry.
  • Page 56: Timer Recording With External Devices

    Recorder without Digital Link Plus If the programmed timer cannot be transmitted to the external recorder (no Digital Link Plus) but supports Digital Link (Loewe-own system), the TV receiver is always used. Digital Link must be switched on on the recorder. Read the operating instructions of your Loewe recorder.
  • Page 57: Rotating The Tv Set (Upgradable Interface)

    Your TV set can be upgraded with the connection for a rotating foot switched off. In order for the TV set to return to the determined switch- control. If the set is assembled with a Loewe stand with motor drive, off position when switching it off, this must be activated (see below).
  • Page 58: Photoviewer

    Operating additional equipment PhotoViewer Viewing photos ➠ The photo overview is displayed. You can view photos in the standard JPEG format stored on a USB stick or a memory card in a card reader. You can also collect photos in a slide show. Folder_1 Connecting ➠...
  • Page 59 Operating additional equipment Open folder Calling the PhotoViewer menu ➠ Folders will only be displayed if they were created on the In the PhotoViewer menu you can make picture settings and select the memory card / USB stick. memory medium. Mark a folder in the photo overview.
  • Page 60: Operating Loewe Equipment

    (TV – REC – DVD – RADIO). This allows you to check which op- erating mode the remote control is set to every time you press a button. Setting the remote control to other Loewe devices The specified button combination must be kept pressed (for approx. 5 s) until one of the LEDs flashes twice.
  • Page 61 Operating additional equipment Functions for the Loewe DVD recorder (Centros 1202, 2102 HD, ViewVision DR + ) Functions for the Loewe DVD player (Auro 2216 PS, 8116 DT) Sound off/on TV Sound off/on LED indicator for current operating mode LED indicator for current operating mode...
  • Page 62: Troubleshooting

    Wait until the timer recording ends or delete (displayed in grey). the timer recording (page 55). The control functions of the Loewe Recorder a) The Digital Link function is not activated or a) Activate Digital Link in the recorder (see and the Timer are not working or are not not possible in the recorder.
  • Page 63 Troubleshooting Problem Possible cause Remedy Digital Link Plus does not work. a) EURO-AV cable is not fully wired (pin 10 not a) Replace the EURO-AV cable. wired). b) Some recorders can only adopt stations b) Restore the recorder to the as-delivered during the initial installation of the TV set.
  • Page 64: Technical Data

    Technical data General data Xelos A 32 Full-HD + 100 Xelos A 37 Full-HD + 100 Type Article number 69402xxx 68427xxx Dimensions for device without stand (W x H x D) in cm 84.4 x 60.2 x 9.5 99.1 x 69.2 x 9.3 Dimensions for device with stand (W x H x D) in cm 84.4 x 62.8 x 26.3 99.1 x 71.9 x 26.3...
  • Page 65: Accessories

    Audio AC3/dts upgrade kit. Numerous speaker combination possibilities with standing speakers, satellite speakers and a subwoofer can be implemented. Loewe Individual Sound Projector: With the Loewe Individual Sound Projector you can enjoy digital Surround Floor Stand 5 MU SP (1 (2 Floor Stand 4 Xelos Rack Sound without expensive installation and connection of several speakers.
  • Page 66: Upgrade Kits

    The retrofit possibilities for your set can be found in the table on page 67. other manufacturers installed in a concealed place. You operate the aux- iliary equipment with its respective remote control via the Loewe TV set. Upgrade kit Audio AC3 / dts (Art.No. 89781.080): The retrofit possibilities for your set can be found in the table on page 67.
  • Page 67: Equipment Variants

    Accessories Equipment variants The equipment of the individual set variants and their upgrade possibilities is listed in the table below. TV type Xelos A 32 Xelos A 37 Full-HD + 100 Full-HD + 100 / DR + Full-HD + 100 Full-HD + 100 / DR + Variants Digital Recorder...
  • Page 68: Glossary

    This is optimal for sports broad- from Loewe) via the Euro AV sockets of the Loewe TV set with concealed casts but for quieter movies it distorts the picture quality. Loewe TV sets setup.
  • Page 69 TV sets, beamers, and other display devices in which the output device is not L-Link: Intelligent system connection between Loewe devices for the sent line interlaced half pictures – unlike in the interlace technique – but automatic exchange of information.
  • Page 70 Glossary Symbol rate: Describes the transmission speed for data transmission. RGB: Colour signals red, green and blue. Terrestrial: In data transmission a wireless transmission that does not use Satellite tuner: Receiver for satellite programmes. satellites as intermediate station is referred to as terrestrial. SDTV: Standard Definition TeleVision.
  • Page 71: Index

    Audio adjustment 20 PhotoViewer 58 Station list 18 $XGLR DPSOLÀHUV  Picture 22 Factory settings picture/sound 22 Status display 25 Auro Loewe Preceiver 51 Picture adjustment 22 Favorites 19 Storage medium 59 Auto format 22 Picture format 22 File folder 59...
  • Page 72 Tel +420 2 34 70 67 00 Email: hkurkjian@aol.com Fax +44 - 1294 315 001 Fax +48 - 58 - 6 61 44 70 Fax +420 2 34 70 67 01 Email: enquiries@loewe-uk.com Email: market@dsv.com.pl (PDLO RIÀFH#EDV\VF] © by Loewe Opta 310309...

Table of Contents