Turning The Set On/Off - Loewe Xelos 46 Operating Instructions Manual

Initial installation

Turning the set on/off

Switching the TV set to standby mode
Press the mains switch on the bottom right of the set (I position).
The display in the control panel on the front lights up first orange and
then red. The set is now in standby mode.
M
- +
R
Control unit
Switching the TV on/off on the control unit
To switch the TV set into operating mode or switch it off into standby
mode, press the middle of the on/off button for about 2 seconds.
Meaning of the display colour of the LEDs in the on/off
button:
Display
Red: Standby mode
Green: TV set is switched on
Orange: Radio mode or archive recording with the Digital
Recorder is active
(1 Only if a USB storage device is connected.
Mains switch
.
(1
Switching the set on with the remote control
Press the on/off button
or
numeric buttons
or
TV button
or
OK button – station list is called
or
MEDIA button – MediaPortal is called.
Switching the set off with the remote control
Press the on/off button.
➠ Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
Switch on in Radio mode
Press R on the TV control unit.
or:
Press the AUDIO button on the remote control
(radio mode, see page 48).
Switch off TV set using the mains switch
Press the mains switch on the bottom of the set (O position).
The TV set is now completely switched off.
➠ When switching off the TV set with the mains switch, the status display
remains lit in the operating eye for about 20 seconds.
21 -