Table of Contents
Advertisement
USER GUIDE
Electrical
ELECTRICAL WARNINGS
WARNING
!
Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
WARNING
!
Altering, cutting or removing power cord,
removing power plug, or direct wiring can cause
serious injury, fire, loss of property and/or life,
and will void the warranty.
WARNING
!
Never use an extension cord to connect power to
the unit.
WARNING
!
Always keep your working area dry.
WARNING
!
Electrical connections should be performed
only by a certified professional. Electrical and
grounding connections must comply with the
applicable portions of the National Electric Code
and/or all local electric codes. Failure to comply
with this procedure can cause property damage,
injury, or death.
WARNING
!
Make sure all facility electrical connections
comply with all local and federal electrical code
regulations.
WARNING
!
Electrical connections or any work required on
the electrical circuits inside the appliance must be
performed by certified technicians in compliance
with local, state, and federal regulations.
Electrical
WARNING
!
Before connecting the unit to the electrical
supply, verify that the electrical and grounding
connections comply with the applicable portions
of the National Electric Code and/or other local
electrical codes. Failure to comply with this
procedure can cause property damage, injury, or
death.
WARNING
!
Before connecting the unit to the electrical
supply, verify that the electrical connection
agrees with the specifications on the data plate.
Failure to comply with this procedure can cause
property damage, injury, or death.
WARNING
!
Appliance must be connected to a grounded,
metal, permanent wiring system. Or an
equipment-grounding conductor must be run
with the circuit conductors and connected to the
equipment-grounding terminal or lead on the
appliance. Failure to comply with this procedure
can cause property damage, injury, or death.
WARNING
!
Appliances equipped with a flexible electric
supply cord, are provided with a three-prong
grounding plug. This plug must be connected
into a properly grounded three-prong receptacle.
Failure to comply with this procedure can cause
property damage, injury, or death.
WARNING
!
If the receptacle is not the proper grounding
type, contact an electrician. Do not remove the
grounding prong from the plug. Failure to comply
with this procedure can cause property damage,
injury, or death.
NOTICE
Electrical installation must observe all state and
local codes. This unit requires connection to a
grounded (three-prong), polarized receptacle that
has been placed by a qualified electrician.
10
Advertisement
Table of Contents
