Table of Contents
Advertisement
1-2
SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during unloading .
This equipment has been carefully inspected at
ANSI Z535.6-2011 (R2017)
Page 18
our factory . Any claim for loss or damage must
be made to the carrier . The carrier will provide
Providing Information About Safety Messages in Collateral Materials and Product
any necessary inspection reports and/or claim
forms .
A1
Explanation of Signal Words and Symbols
Apparent Loss or Damage
Signal words and safety symbols that are used in a product's collateral materials or on the product may
If there is an obvious loss or damage, it must be
be defined in collateral materials if space is available.
noted on the freight bill or express receipt and
A1.1
Safety Alert Symbol
signed by the carrier's agent; otherwise, carrier
The meaning of the safety alert symbol may be provided in collateral materials. The following artwork may
be used for this purpose.
may refuse claim .
Concealed Loss or Damage
When loss or damage is not apparent until after
equipment is uncrated, retain all packing materials
and submit a written request to the carrier for
A1.2
Signal Words
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z535.4 standards
inspection, within 15 days .
may be explained in collateral materials. The following artwork may be used for this purpose.
»
If the case is to be moved using a fork lift,
position the forks of the lift directly under the
arched pods or shipping rails. Use extreme
caution when transporting cases. Personal injury
or death could result if a case falls on personnel.
A1.3
Other Highlighting Conventions
The meaning of any other highlighting conventions used to differentiate safety messages (e.g., text
manipulations, indention, etc.) may be explained in collateral materials.
A1.4
Safety Symbols
The meaning of any safety symbols used on safety labels or collateral materials may be explained in
collateral materials.
Copyright National Electrical Manufacturers Association
Provided by IHS Markit under license with NEMA
No reproduction or networking permitted without license from IHS
LIFT
HERE
P/N 0535974 _R
Annex A
Safety Signs and Labels
(Informative)
This is the safety alert symbol. It is used to alert you
to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
physical injury.
Safety instructions (or equivalent) signs indicate specific
safety-related instructions or procedures.
Shipping
POINTS
Brace
Shipping Brace &
© 2017 National Electrical Manufacturers Association
Licensee=Hussmann Corp/8160899001, User=Trevett, Jason
Not for Resale, 02/16/2021 11:49:55 MST
Installer lift at either
of THESE POINTS
with J-Bar when
J-Bar
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
UNLOADING
Improper handling may cause damage to the
merchandiser when unloading . Use the shipping
brace and arched pod locations to lift when
unloading cases .
1 . Do not drag the merchandiser out of the
trailer . Use a Johnson bar (mule) .
ANSI Z535.6-2011 (R2017)
2 . Do not lift the case by the liner . Lift with
Page 18
the metal case base, arched plastic pods or the
shipping brace .
Providing Information About Safety Messages in Collateral Material
3 . Do not lift from the bottom edge of the end
panel .
A1
Explanation of Signal Words and Symbols
Signal words and safety symbols that are used in a product's collateral materials or on t
be defined in collateral materials if space is available.
EXTERIOR LOADING
A1.1
Safety Alert Symbol
The meaning of the safety alert symbol may be provided in collateral materials. The follo
be used for this purpose.
Do NOT walk on top or inside of merchandisers
or damage to the merchandisers and serious
personal injury could occur . T
sTrucTurally designed To supporT excessive
exTernal loading
A1.2
Signal Words
Use caution when working around refrigera-
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z53
tion lines or water lines, damage to equipment
may be explained in collateral materials. The following artwork may be used for this purp
and personal injury could occur .
»
Do not walk on case. Do not store items or
flammable materials atop the case.
LIFT
A1.3
Other Highlighting Conventions
Arched Pod
The meaning of any other highlighting conventions used to differentiate safety message
manipulations, indention, etc.) may be explained in collateral materials.
A1.4
Safety Symbols
The meaning of any safety symbols used on safety labels or collateral materials may be
collateral materials.
moving case .
Copyright National Electrical Manufacturers Association
Provided by IHS Markit under license with NEMA
No reproduction or networking permitted without license from IHS
Safety Signs and Labels
(Informative)
This is the safety alert symbol. It is used to a
to potential physical injury hazards. Obey a
hey are noT
messages that follow this symbol to avoid
injury or death.
such as the weight of a person .
DANGER indicates a hazardous situation wh
WARNING indicates a hazardous situation w
CAUTION indicates a hazardous situation wh
NOTICE is used to address practices not rela
Safety instructions (or equivalent) signs indic
Arched Pod
Location
© 2017 National Electrical Manufacturers Association
LIFT HERE
Annex A
avoided, will result in death or serious inj
avoided, could result in death or serious
avoided, could result in minor or modera
physical injury.
safety-related instructions or procedures
Licensee=Hussmann Corp/8160899001, User=Trevett, Jason
Not for Resale, 02/16/2021 11:49:55 MST
Advertisement
Table of Contents
