Table of Contents
Advertisement
be used for this purpose.
iv
ANSI Z535.5 DEFINITIONS
The definitions below are used to clarify the magnitude and urgency of harm and damage, considering
problems arising from misuse . Relative to their potential danger, the definitions are divided
A1.2
Signal Words
into four parts according to ANSI Z535 Series .
The meaning of the different signal words as defined by the ANSI Z535.6 and ANSI Z535.4 standards
may be explained in collateral materials. The following artwork may be used for this purpose.
A1.3
Other Highlighting Conventions
The meaning of any other highlighting conventions used to differentiate safety messages (e.g., text
manipulations, indention, etc.) may be explained in collateral materials.
INSIGHT INSTALLATION
A1.4
Safety Symbols
TOOL LIST
The meaning of any safety symbols used on safety labels or collateral materials may be explained in
(recommended)
collateral materials.
Unloading From Trailer:
Lever Bar (also known as a Mule,
Johnson Bar, J-bar, Lever Dolly, and pry lever)
Moving Dolly
Setting Case Line-Up:
Level, 4 ft (suggested)
Ratchet
¼ in . Socket Drill Bit
/
in . Socket Drill Bit
5
16
½ in . Socket - Deep Drill Bit
½ in . Open End Wrench
Cordless Impact Drill
Caulking Gun
10 in . Adjustable Crescent Wrench
Pallet Jack
P/N 0535974 _R
This is the safety alert symbol. It is used to alert you
to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
DANGER indicates a hazardous situation
DANGER indicates a hazardous situation which, if not
which, if not avoided, will result in death or
avoided, will result in death or serious injury.
serious injury.
WARNING indicates a hazardous situation
WARNING indicates a hazardous situation which, if not
which, if not avoided, could result in death or
avoided, could result in death or serious injury.
serious injury.
CAUTION indicates a hazardous situation
CAUTION indicates a hazardous situation which, if not
which, if not avoided, could result in minor or
avoided, could result in minor or moderate injury.
moderate injury.
NOTICE is used to address practices not
NOTICE is used to address practices not related to
related to personal injury.
physical injury.
SAFETY INSTRUCTIONS (or equivalent)
signs indicate specific safety-related
Safety instructions (or equivalent) signs indicate specific
safety-related instructions or procedures.
instructions or procedures.
—¦—
© 2017 National Electrical Manufacturers Association
Licensee=Hussmann Corp/8160899001, User=Trevett, Jason
Not for Resale, 02/16/2021 11:49:55 MST
—¦—
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
MANUAL REVISION HISTORY
REVISION R
1 . Removed Page 5-4; Revised fan motor service
instructions,
Page 6-1, 6-2 . Updated cleaning procedures,
Page 5-1 . Updated warning colors
REVISION Q
Not used
REVISION P
1 . Revised procedures for fan motor harness connector,
Section 5 & 6 .
Advertisement
Table of Contents
