Installation - Hussmann Mobile Produce Instruction Manual

Installation

Location
The Mobile Produce Case display has been designed for
use only in air conditioned stores where temperature and
humidity are maintained either 75°F ambient and 55% RH.
When selecting the location for placement of this
case, avoid the following conditions:
Excessive air movement
• Doors
• Air‐conditioned vents
• Other air sources
Excessive heat
• Windows
• Sun
• Flood lamps 8 feet or less from the product
• Other heat sources
Skid Removal
Unstrap case from skid and roll case off to move near plac‐
ing location
Note:
Cases are manufactured and shipped to stores with
casters installed on the base frame to make the job of
moving cases easier for everyone involved with the
manufacturing, shipping and installation process.
Casters not only speed up the process, but they also
reduce the chance of damage from raising and lowering
cases with "J" bars to place them on dollies, skates or roll‐
ers. In most situations, one or two persons can move the
case with ease.
Do not Push, Pull, Adjust or Manipulate the Mobile
Produce Case by any glass component.
Doing so will result in:
•Severe damage to such components
•Glass or Acrylic breakage
•Serious injury
Never stand on the Mobile Produce Case deck for
any reason. These surfaces are not steps and are not
designed to support such loads.
Doing so will result in:
•Damage to case
•Serious injury to user
Moving Mobile Produce Case
Refer to shaded areas of description below for proper
grasp locations im movement of case which will not dam‐
age Mobile Produce Case or components.
4