Registering Permit Fax No - Olivetti d-COPIA 4004MF Operation Manual

Fax Settings > Transmission Restriction

Registering Permit FAX No.

1
2
3
Reception • Register Reject FAX numbers.
Rejection (Refer to
on page
• Reception restriction settings are
specified in [Reject List] in Reception
Restrictions. (Refer to
Reception Restriction on page
*1 If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local
FAX Numbers (Indicates local FAX information entries, not the actual line numbers.) are not regis-
tered.
NOTE
Up to 25 Permit FAX numbers can be registered.
Display the screen.
1
Press the [System Menu/Counter] key.
2
Press the [▲] or [▼] key to select [FAX].
3
Press the [OK] key.
4
Press the [▲] or [▼] key to select [TX/RX Restrict.].
5
Press the [OK] key.
6
Press the [▲] or [▼] key to select [Permit No. List].
7
Press the [OK] key.
Add a permit fax number.
1
Press [Menu].
2
Press the [▲] or [▼] key to select [Add FAX Number].
3
Press the [OK] key.
4
Use the numeric keys to enter a Permit FAX number.
NOTE
Up to 20 digits can be entered.
5
Press the [OK] key.
To register another permit fax number, repeat Steps 2-1 to 2-5.
Prerequisites
*1
Registering Reject FAX No.
8-11.)
Setting
8-16.)
8-10
Reception Rejection
Requirements
• The sender's Local FAX Number is
not registered.
• The sender's Local Fax Number
matches a Reject FAX No. registered
on the machine.