Install The Display Driver - Planar Dome Q2 Reference Manual

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Install AX1 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
USB Connections
Power Management System
Driver Removal

Install the Display Driver

Upon restarting your computer system, you must log on with administrator
privileges. On both Windows XP and Windows 2000 systems, Service Pack 1 or
higher must be installed.
To install the display driver
1 Start the system. Click Cancel on the Found New Hardware Wizard dialog box.
2 Insert the Planar Installation CD to run the SETUP.EXE utility.
3 Click Next on the Welcome dialog.
4 Click Yes to the license agreement. The installation starts.
5 Follow the onscreen instructions to complete the installation.
Planar recommends that you select the Express installation option.
6 When the Setup complete message appears, select Yes, I want to restart
my computer now and click Finish.
To configure the display
1 Right-click the desktop and select Properties > Settings.
2 Set the resolution to 1600 x 1200.
3 Click the Advanced button and select the Monitor tab.
4 Set the refresh rate to 60 Hz.
5 Click OK until you return to the desktop.
Dome Q2 Display
Installation tips
Restarting
Upon restart, your computer is running
in a basic video mode. With a correctly
installed controller, the operating
displays various messages during
the boot process.
If you have problems restarting,
see Troubleshooting.
SETUP utility
If the installation program does not
start automatically, do the following:
1 Click Start in the Windows task bar.
2 Click Run.
3 Browse to select SETUP.EXE from
the root directory of the Planar
Installation CD.
4 Click OK.
Display setup
After you install the driver, you can
use the Display Properties menu to
set up the display configuration.
Video settings
Use only the resolution 1600 x 1200.
Other resolution settings may produce
less than optimal results.
10