Table of Contents
Advertisement
Touch Screen Driver Installation
Driver Installation Process:
1.
Before you start to install the touch driver, please be sure the USB or the RS-232
Serial cable is connected from the PC to the LCD display.
2.
Uninstall any touch screen driver that may be on your system.
3.
Click on the driver link found on the CD-ROM.
4.
Follow instructions as found below and on the CD-ROM.
5.
After installation is complete, click "Finish".
PT2275SW Driver Install Instructions:
The PT2275SW is available with both RS232 and USB connections. The PT2275SW model
is Microsoft® Windows® HID (Human Interface Device) compatible if you use the USB touch
screen interface. No additional software driver is required for general operation of the touch
screen. A calibration tool can be installed for improved touch position accuracy. See "Optional
Calibration Tool Install" section for more information.
The touch driver is located on the enclosed CD-ROM for these operating systems:
Windows® VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux OS.
Please note: Do not plug in both RS232 and USB cables. Doing so may cause a driver
confl ict, making your touch screen idle.
19
Advertisement
Table of Contents
