Front-Panel Controls - Planar Dome Q2 Reference Manual

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Install AX1 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY

Front-Panel Controls

Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
USB Connections
Power Management System
Driver Removal
Front-Panel Controls
The onscreen display (OSD) menu is the user interface for controlling various
aspects of the Q2 display. With it you can easily adjust functions such as brightness,
OSD horizontal and vertical position, and language and transparency.
This display is originally manufactured as a dual-mode display able to operate in
either analog or digital mode. Thus, some front-panel controls may not be relevant
to the configuration of the Q2 display as a digital unit. See
2 3
Dome Q2 Display
page 3.
1
5 6
4
Legend
1 Controls Locked/Unlocked
Press the Menu and RIGHT
buttons simultaneously for
3 seconds to lock or unlock
the current control settings.
2 Source button
Press to make the DVI Digital
connector active (Source >
UP or DOWN to highlight
DVI DIGITAL > Select).
3 Menu button
Press to enter or exit the
onscreen display.
4 Navigation buttons
Press UP, DOWN, LEFT, or RIGHT
button to choose or adjust items
in the onscreen display.
5 Select button
Press to enter a selection in
the onscreen display.
6 Display power switch and
DPMS indicator
Press to turn the display on or
off. The power indicator lights up
green when the display operates
normally. The color changes to
amber when the display is in
energy-saving mode.
12