Planar Dome Q2 Reference Manual page 29

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Install AX1 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
USB Connections
Power Management System
Driver Removal
Display Specification
Q2 Specification
Display unit 20.1 inch (51 cm) flat-panel active matrix TFT LCD
Antiglare coating
20.1 inches viewable
0.255 mm pixel pitch
Sync input Horizontal frequency 30 to 80 kHz (automatic)
Vertical frequency
Input form
Video input Signal input
Input form
Resolution Max
Recommended
Plug and Play DDC 2B+EDID built-in USB hub: 1 uplink and 2 downlink ports
Power consumption Status
Normal
DPM stand-by/suspend
DPM off
Power key off
Power cutoff switch off
* ( ) with USB
Dome Q2 Display
56 to 85 Hz (automatic)
Separate TTL, positive/negative
Composite TTL positive/negative
SOG (sync on green)
Digital
DVI-I connector
Analog (0.7Vp p/75 ohm)
Digital
Analog - VESA 1600 x 1200 @ 60 Hz
Digital - VESA 1600 x 1200 @ 60 Hz
VESA 1280 x 1024 @ 70 Hz
VESA 1600 x 1200 @ 60 Hz
Consumption* LED Color
60 W (65 W) Green
≤5 W (10 W)
Amber
≤3 W (10 W)
≤3 W (10 W)
Off
≤1 W
–MORE–
21