Planar Dome Q2 Reference Manual page 7

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Q2 Display
Check Package Contents
Identify Components
Position the Display
Desk Stand Features
INSTALLING THE DISPLAY
Install AX1 Controller
Connect Cables
Install Display Driver
Adjust Display Properties
OPERATING THE DISPLAY
Front-Panel Controls
Screen Adjustments
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
USB Connections
Power Management System
Driver Removal
Installation precautions
•
Place the power cord where it is free of equipment and foot traffic. Do not allow
anything to rest or roll over the power cord.
•
Do not set up the display near a window. Exposing the display to rain, water,
moisture, or direct sunlight can damage it.
•
Do not cover or obstruct the display ventilation with cloth or other materials.
•
Do not set up the display in a built-in enclosure unless proper ventilation is
provided.
•
Do not set up the display near a heat source.
•
Do not rub or strike the display screen with any hard object, or apply excessive
pressure to the screen. Otherwise, the active matrix LCD screen could be
damaged permanently.
•
Store the display in an environment with a temperature range from -20 to
65 degrees Celsius. Storing your display outside this range could result in
permanent damage.
•
Do not expose the display to liquid or drop it. If the case has been damaged,
the unit may pose a shock or fire hazard. Unplug the unit immediately and
call customer support for assistance.
•
Do not remove the back cover or disassemble the display unit. There are no user-
serviceable parts inside.
Dome Q2 Display
Service requirements
Unplug the display from the outlet and
refer servicing to qualified personnel
when any one of these events occur:
•
The power cord or plug is damaged
or frayed.
•
Liquid has been spilled inside the
display.
•
The display has been exposed to
rain or water.
•
The display does not operate when
you follow the instructions. Adjust
only those controls covered in the
instructions. Improper adjustment of
other controls may result in damage.
•
The display has been dropped or
the cabinet has been damaged.
•
The display exhibits a distinct change
in performance.
•
Snapping or popping from the
display is continuous or frequent
while the display is operating.
Some displays may make sounds
when being turned on or off, or
when changing video modes
Do not service the display yourself.
Opening the covers may expose you
to voltage or other hazards.
–MORE–
vii