Table of Contents
Advertisement
20. Align the edges of the computer cover with the rail guides on the computer. Then, slide the computer
cover as shown and install the three screws to secure the cover to the computer.
Figure 56. Installing the computer cover
21. Reinstall the I/O board. See "Replacing the I/O board" on page 101.
22. Reinstall the card reader. See "Replacing the card reader" on page 91.
23. Reinstall the I/O shield. See "Replacing the I/O shield" on page 90.
24. Reinstall the I/O bracket. See "Replacing the I/O bracket" on page 89.
25. Reinstall the system board. See "Replacing the system board" on page 108.
26. Reinstall the heat sink assembly. See "Replacing the heat sink" on page 106.
27. Reinstall the Wi-Fi card. See "Replacing the Wi-Fi card" on page 105.
28. Reinstall the Wi-Fi antennas. See "Replacing the Wi-Fi antennas" on page 96.
29. Reinstall the VESA mount bracket. See "Replacing the VESA mount bracket" on page 99.
30. Reinstall the cover presence switch. See "Replacing the cover presence switch" on page 98.
31. Reinstall the system board shield. See "Replacing the system board shield" on page 97.
32. Reinstall the Orchid Tilt Stand. See "Replacing the Orchid Tilt Stand" on page 92.
33. Reinstall the storage drive. See "Replacing the memory module" on page 87.
34. Reinstall the bottom cover. See "Replacing the bottom cover" on page 86.
35. Reinstall the memory module. See "Replacing the memory module" on page 87.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 117.
114
ThinkCentre X1 Hardware Maintenance Manual
Advertisement
Table of Contents
