Setting Of Functions - JUKI DDL-7000A-7 Series Instruction Manual

4. Setting of functions

Functions can be selected and specified.
2) To change the function setting number press
3) After having changed the function setting number to a desired one, press switch
set value of the selected function setting No.
❽ to  change the set value.
4) Press
❸ to confirm the set value.
5) Press switch
A
❽ - 
❷
❷ .
1) Press
The content on display section A is changed over
to display function setting number (P-**).
(The display item which was previously changed
is displayed unless the power has not been turned
off after the previous change.)
* If the screen display does not change, re-carry out
operation described in step 1).
Be sure to re-turn ON the power switch
when ten or more seconds have passed af-
ter turning it OFF. If the power switch is re-
turned ON immediately after turning it OFF,
the sewing machine may fail to operate
normally. In such a case, be sure to turn
ON the power switch again properly.
❽ to  and change it to a desired one.
– 26 –
❸ to display the