Table of Contents
Advertisement
Actions under each setting state
❶ Used as the normal reverse feed stitching touch-back switch.
❷ Used for reinforcing seam (press sewing) of the pleats. (It works only when the sewing machine is
running.)
❸ Used for reinforcing seam (press sewing) of the pleats. (It works either when the sewing machine stops
or when the sewing machine is running.)
❹ Used as starting switch for reverse feed stitching at the sewing end. (Used as the substitute for thread
trimming by depressing back part of the pedal. It works only when the sewing machine is running. It is
especially effective when the sewing machine is used as the standing-work machine.)
❺ Used as starting switch for reverse feed stitching at the sewing end. (Used as the substitute for thread
trimming by depressing back part of the pedal. It works either when the sewing machine stops or when
the sewing machine is running. It is especially effective when the sewing machine is used as the stand-
ing-work machine.)
⑦ Sewing speed of one-shot stitching (Function setting No. 38)
This function can set, by the pedal operation of one time, the sewing speed of one-shot stitching when
the sewing machine continues stitching until completing the number of stitches specified or detecting the
material end.
Setting range : 150 to MAX. sti/min. <50 / sti/min>
n.
3
8
(Caution) The max. sewing speed of one-shot stitching is limited by the model of the sewing machine
head.
⑧ Holding time of lifting presser foot (Function setting No. 47)
This function automatically lowers the presser foot when the time set with the setting No. 47 has passed
after lifting the presser foot.
When the pneumatic type presser foot lifter is selected, the holding time control of lifting presser foot is
limitless regardless of the set value.
Setting range : 10 to 600 sec <10 / sec>
n.
4
7
– 40 –
Advertisement
Table of Contents
