Table of Contents
Advertisement
(3) Constant-dimension stitching pattern
The constant-dimension stitching pattern can be set.
[How to set the constant-dimension stitching]
• Straight stitching
switch ❼ to select the constant-dimension sewing pattern.
1) Press
When the constant-dimension stitching pattern is enabled, LED Ⓖ lights up.
2) When the constant-dimension sewing pattern is selected, the number of stitches of process E can be set
switch ❼ again.
by pressing
3) The number of stitches (0 to 999) for the constant-dimension stitching can be selected by pressing
switches ❾.
and
• Label sewing
switch ❽ to select the label sewing.
1) Press
When the selection is effective, LED Ⓗ lights up.
switch ❽ is pressed, the indication of processes E to H will be changed over.
Every time
2) Display the target process the number of stitches of which is to be changed. In this state, the number of
stitches of the processes (EFGH) can be changed by pressing
and
– 24 –
switches ❾.
Advertisement
Table of Contents
