BenQ V7000i User Manual page 39

• HDMI Format: Selects a suitable RGB color range to correct the color
accuracy.
• HDMI Equalizer: Adjusts the equalizer gain settings for an HDMI signal. The
higher the setting, the stronger the gain value. If there are more than one HDMI
port on the projector, select the HDMI port first before adjusting the value.
HDMI
• HDMI EDID: Allows you to adjusts EDID settings for each HDMI input.
Settings
• Electronic Control: To enable or disable the HDMI Electronics Control
function.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
From Projector
From Device
Password See
You can turn off the LED warning lights. This is to avoid any light disturbance when
LED Indicator
viewing images in a dark room.
Returns all settings to the factory preset values.
Reset All
Settings
The following settings will still remain: Picture Mode, User Mode Management, Brightness,
Contrast, Color, Tint, Sharpness, Advanced, Projector Position, Source Rename, and
Password.
• Auto: Automatically selects a suitable color range for the incoming HDMI
signal.
• RGB Limited: Utilizes the Limited range RGB 16-235.
• RGB Full: Utilizes the Full range RGB 0-255.
• YUV: Utilizes the YUV color range.
Utilizing the password function on page 22.
When the projector is turned on/off, the connected
device will be activated/shut down, too.
When the connected device is turned on/off, the
projector will be activated/shut down, too.
Menu operation 39