Table of Contents
Advertisement
3
30
1
2
4
Checking the gear oil level
To check the gear oil level, first remove the plug
parked in an upright position, a small quantity of oil should flow out of the
indicator opening
2
. If oil must be added, tilt the motorcycle and pour
automatic gear oil (Motorex ATF Super) into the bore.
!
L
ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR
,
FORE
ONLY USE BRANDED PRODUCTS
Changing gear oil *
The engine must be warmed up before changing the gear oil. Park the
motorcycle on a horizontal surface, remove the oil drain plug
the used oil into an appropriate container. Clean the sealing surface, mount
the oil drain plug together with the gasket and tighten to 15 Nm.
4
Remove stopper
and fill in 0.15 liters of automatic gear oil (Motorex
ATF Super). Mount the stopper and check the engine for tightness.
!
L
ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR
,
FORE
ONLY USE BRANDED PRODUCTS
1
. With the motorcycle
CAUTION
(M
ATF S
).
OTOREX
UPER
CAUTION
(M
ATF S
).
OTOREX
UPER
!
. T
-
HERE
3
and drain
!
. T
-
HERE
Advertisement
Table of Contents
