Customizing The Home Screen; Touchscreen Icons - Johnson Controls TEC3322-1 Series Installation Manual

Figure 17: Thermostat controller home screen in cooling mode (left) and heating mode (right)

Customizing the home screen

Customizing the Home screen settings include:
• Brightness
• Enable Backlight
You can also show or hide these items on the Home screen:
• Fan Button
• Temperature
• Humidity
To customize the Home screen:
1. Press the Menu icon.
2. Press Display Settings.
3. Enable or disable elements of the home screen as appropriate for the building owner and occupants.
4. Set the passcode on the thermostat controller to prevent the occupants from changing settings that they should
not have access to change.

Touchscreen icons

Table 5 describes the touchscreen icons on the home screen. Press and release a touchscreen icon to activate the
TEC. Additional touchscreen icons appear based on the menu, and those icons are also described in Table 5.
Table 5: Touchscreen icons (Part 1 of 5)
Icon Icon name
Menu
Alarm
Unit Power
On
Standby
TEC3000 Series Networked and Wireless Proportional Fan Coil and Individual Zone Thermostat Controllers with
• Units
• Time
• Off Button
• Hold Button
• Setpoint
Description
Displays the configuration screens where various settings may be adjusted.
Indicates that the thermostat controller has triggered an alarm.
Powers the thermostat controller on or off.
Notes:
• This icon disables all equipment control but does not physically power down
the unit.
• On the modern home screen, if the Unit Power icon is in standby mode, the
temperature and humidity are also displayed in standby mode to indicate
that control off or standby mode is active.
Dehumidification Capability Installation Guide
• Time Zone
• Time Format
• Alarms
• Occupancy Status
• Unit Status
15
• Date
• Date Format
• Date/Time