Ncc Discovery - ZyXEL Communications NWA Seres User Manual

Each field is described in the following table.
Table 40 Configuration > Network > AC Discovery
LABEL
Discovery Setting
Auto
Manual
Primary / Secondary
Static AC IP
Disable
Apply
Reset

9.6 NCC Discovery

You can manage the Zyxel Device through the Zyxel Nebula Control Center (NCC). Use this screen to
configure the proxy server settings if the Zyxel Device is behind a proxy server.
To access this screen, click Configuration > Network > NCC Discovery.
Figure 58 Configuration > Network > NCC Discovery
Chapter 9 Network
DESCRIPTION
Select this option to use DHCP option 138/DNS SRV record/Broadcast to get the AC's IP
address. If the Zyxel Device and a Zyxel AC, such as the NXC2500 or NXC5500, are in the
same subnet, it will be managed by the controller automatically.
Select this option and enter the IP address of the AC manually. This is necessary when
the AP Controller is not in the same subnet and you want it to manage the Zyxel
Device.
Specify the primary and secondary IP address of the AC to which the Zyxel Device
connects.
Select this to manage the Zyxel Device using its own Web Configurator, neither
managing nor being managed by other devices. Please note if an AP Controller is in
the same subnet, you will need to click Disable if you do not want the Zyxel Device to
be managed.
Click Apply to save the information entered in this screen.
If you select Auto or Manual, the AC uploads the firmware package for managed AP
mode to the Zyxel Device and you cannot log in as the web configurator is disabled;
you must manage the Zyxel Device through the AC on your network.
Click Reset to return the screen to its last-saved settings.
NWA/WAC/WAX Series User's Guide
103