User Summary; Add/Edit User - ZyXEL Communications NWA Seres User Manual

12.2 User Summary

The User screen provides a summary of all user accounts. To access this screen click Configuration >
Object > User.
Figure 74 Configuration > Object > User
The following table describes the labels in this screen.
Table 50 Configuration > Object > User
LABEL
Add
Edit
Remove
Object Reference
#
User Name
User Type
Description

12.2.1 Add/Edit User

The User Add/Edit screen allows you to create a new user account or edit an existing one.
12.2.1.1 Rules for User Names
Enter a user name from 1 to 31 characters.
The user name can only contain the following characters:
• Alphanumeric A-z 0-9 (there is no unicode support)
• _ [underscores]
Chapter 12 User
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to
remove it before doing so.
Select an entry and click Object Reference to open a screen that shows which settings use
the entry.
This field is a sequential value, and it is not associated with a specific user.
This field displays the user name of each user.
This field displays type of user this account was configured as.
• admin - this user can look at and change the configuration of the Zyxel Device
• limited-admin - this user can look at the configuration of the Zyxel Device but not to
change it
• user - this user has access to the Zyxel Device's services but cannot look at the
configuration
This field displays the description for each user.
NWA/WAC/WAX Series User's Guide
123