Ncc Discovery - ZyXEL Communications NWA Series User Manual

9.6 NCC Discovery

You can manage the Zyxel Device through the Zyxel Nebula Control Center (NCC). Use this screen to
configure the proxy server settings if the Zyxel Device is behind a proxy server.
To access this screen, click Configuration > Network > NCC Discovery.
Figure 71 Configuration > Network > NCC Discovery
Each field is described in the following table.
Table 43 Configuration > Network > NCC Discovery
LABEL
Nebula Control Center Status
Internet
Nebula Connectivity
Nebula Control Center Discovery Setting
Enable
Use Proxy to Access NCC
Proxy Server
Proxy Port
Authentication
User Name
Password
Chapter 9 Network
DESCRIPTION
This field displays whether the Zyxel Device can connect to the Internet.
This field displays whether the Zyxel Device can connect to the Zyxel Nebula Control
Center (NCC).
Select this option to turn on NCC discovery on the Zyxel Device. The Zyxel Device will try
to discover the NCC and go into NCC management mode when it is connected to the
Internet and has been registered in the NCC.
If NCC discovery is disabled, the Zyxel Device will not discover the NCC and remain in
standalone operation.
If the Zyxel Device is behind a proxy server, you need to select this option and configure
the proxy server settings so that the Zyxel Device can access the NCC through the
proxy server.
Enter the IP address of the proxy server.
Enter the service port number used by the proxy server.
Select this option if the proxy server requires authentication before it grants access to
the NCC.
Enter your proxy user name.
Enter your proxy password.
NWA/WAC/WAX Series User's Guide
115