Foot Control; Regulating The Speed Via The Foot Control; Activate/Deactivate Additional Function; Spool Pin - Bernina 790 PRO Manual

Sewing Preparation

2.4 Foot Control

Regulating the Speed via the Foot Control

Via the foot control the speed can be adjusted infinitely variable.
> Press the foot control down carefully to start the machine.
> To sew faster, press the foot control harder.
> Release the foot control to stop the machine.

Activate/Deactivate Additional Function

The Foot Control can be programmed with a second function that can be activated and deactivated by a
Back-kick. On delivery, the Back-kick is programmed with the function «Needle Up/Down».
> To raise or lower the needle, press the foot control downward with your heel.
The Back-kick function can be programmed individually. ( 53)

2.5 Spool Pin

Swiveling Spool Pin

Installing the spool holder
With metallic or other special threads, it is recommend to use the swiveling spool pin.
The swiveling spool holder is necessary when several threads are sewn and it can also be used for bobbin
winding while sewing.
37