Table of Contents
Advertisement
Sewing preparation
Sewing preparation
power Switch/power cable
5
4
3
foot control
2
3
Slide-on table
18
1 Power Switch
The sewing computer is switched on («I») and off («0») with the power switch.
1
2
I
0 the sewing computer is switched off
2 Power plug socket
3 Foot control socket
4 PC-connection for embroidery software
5 USB-connection
connecting the foot control
⦁
⦁
⦁
1
Sewing speed control
Control the sewing speed by pressing the foot control 2 more or less.
4
adjust needle down or up
⦁
6
5
►
removing the foot control
⦁
⦁
The slide-on table increases sewing surface.
attaching the slide-on table
⦁
►
⦁
►
⦁
removing the slide-on table
⦁
⦁
1
⦁
033805.51.04_2014-02_Manual_B710_EN
the sewing computer is switched on
unwind the cable
plug the cable in the outlet 1
unwind the cable to the desired length and slip into 4 or 5
sink the heel back 3 on the foot control
the needle adjusts the position up/down
wind the cable around the reel
plug cable into 6
uSa/canada only: use only foot controller type LV-1 with
sewing computer B 710.
turn the handwheel (see page 13)
needle is raised
press «Presser foot position»-button
presser foot is lifted
slide table to the right, over the free arm until it engages
raise the needle and presser foot
press button 1 down
pull slide-on table to the left
Advertisement
Table of Contents
