Duplicating The Embroidery Design - Bernina 790 PRO Manual

Creative Embroidering
> After the reference points have been embroidered, tap «Endless Embroidery».
> Remove the hoop and hoop the fabric in such a way that the embroidered reference points are in the
> Attach the hoop.
> Tap «Confirm».
> Use the arrow icons to determine on which side of the embroidered part the next reference point should
> To position the embroidery hoop precisely, turn the «Upper Multi-function Knob» or the «Lower Multi-
> Tap «Confirm».
> Press the button «Start/Stop» and continue embroidering.
> Repeat these steps until the desired length of the border is completed.

Duplicating the Embroidery Design

> Select the embroidery design.
> Tap «i-Dialog».
154
– An animation appears to indicate that the fabric needs to be rehooped.
upper embroidery area of the hoop and the reference points are located at least 3 cm (1.18 inch) away
from the upper edge of the hoop.
– The hoop is automatically moved close to the reference point.
– The icon «AUTO» is activated, and the hoop automatically moves to the vicinity of the last reference
point.
be placed.
function Knob».