Sewing Eyelets - Bernina 790 PRO Manual

Buttonholes
> Lower the presser foot.
> Perform the first stitches in the left hole via the handwheel.
> Keep turning the handwheel until the needle changes to the right hole. In doing so, check whether the
> Hold the threads and push the foot control.
> For increased stability, sew the Button sew-on Program again.
> Cut the threads with the machine. Alternatively, pull the sewing projects from under the sewing machine

9.17 Sewing Eyelets

For increased stability sew the eyelet twice. Adjust stitch with the balance if necessary.
•
> Tap «Buttonholes».
> Select Eyelet with Small Zigzag 61 or Eyelet with Straight Stitch 62.
> Turn the, «Upper Multi-function Knob» or «Lower Multi-function Knob» to alter the size of the eyelet.
> Sew the Eyelet Program.
> Use an awl, punch pliers or a hole punch to open the eyelet.
122
needle goes into the right hole. If necessary, adjust the stitch width by turning the upper Multifunction
knob.
– The machine sews on the button and stops automatically.
and trim the threads by hand. Pull the upper thread to the wrong side of the fabric and knot it with the
bobbin thread.
The Reverse Pattern Foot #1C or the Open Embroidery Foot #20C is fitted.
– The machine stops automatically at the end of the Eyelet Program.