Sewing Visible Hems - Bernina 790 PRO Manual

Practical Stitches
•
> Fit the Blindstitch Foot #5.
> Tap «Practical Stitches».
> Select Blind Stitch 9.
> Fold the fabric so that the finished fabric edge is on the right side.
> Place the fabric under the presser foot and move the folded edge against the metal guide on the presser
> Guide the folded edge evenly along the metal guide of the presser foot to sew the stitches evenly deep.
> After sewing about 10 cm, check both sides of the fabric and adjust the width again if necessary.

6.19 Sewing Visible Hems

The visible hem is particularly suitable for elastic seams in tricot made of cotton, wool, synthetic and mixed
fibers.
> Fit the Reverse Pattern Foot #1C/1D.
> Tap «Practical Stitches».
> Select Tricot Stitch 14.
> Iron the hem and baste if necessary.
> Reduce the presser foot pressure if necessary.
> Sew the hem in the desired depth on the right side of the fabric.
> Trim off the remaining fabric on the wrong side of the fabric.
98
The fabric edges are finished.
foot.
– Make sure that the needle only pierces the edge of the fold.