Activating Quilting Settings; Reducing Color Changes; Multi-Colored Embroidery Design On/Off; Endless Embroidery - Bernina 790 PRO Manual

> Tap «Embroidery».
> Tap «Embroidery Sequence Control».
– A compact view of the embroidery design appears on the left side of the display. On the right side the
embroidery design is shown in enlarged view.
> Select the desired position in the compact view.
> To move the hoop stitch by stitch, turn the «Upper Multi-function Knob».
> To move the hoop in large steps, turn the «Lower Multi-function Knob».
– The number in the yellow-outlined icon indicates the number of stitches within the embroidery
sequence.
> To select the desired stitch by entry, tap the icon «Stitch Position via Number».
0-9
0-9

Activating Quilting Settings

The function is deactivated by default, and the settings for thread cutting are taken from the embroidery
settings in the Setup Program. When the function is activated, the settings required for quilting become
active, regardless of any settings in the Setup Program:
• Particular securing stitches (unless the embroidery design contains programmed securing stitches)
• The thread cut is inactive
• Thread-away is deactivated
> Select the embroidery design.
> Tap «Embroidery».
> To activate the function, tap «Quilt Settings».
> To deactivate the function, tap «Quilt Settings» again.

Reducing Color Changes

If the embroidery designs overlap, the color changes cannot be reduced.
> Select the embroidery design.
> Tap «Embroidery».
> Tap «Reduce Color Changes».
– Identical colors of the embroidery design are collected to one color.
– If the embroidery design is not completed and the machine is switched off, the function must be
activated again before embroidering is continued.

Multi-colored Embroidery Design On/Off

Multi-colored embroidery designs can also be embroidered in one color.
> Select the embroidery design.
> Tap «Embroidery».
> Tap «Multi-colored Embroidery Design On/Off».
– The embroidery design is embroidered in one color.

Endless Embroidery

This makes it possible to embroider trims that have already been started, even if the machine has been
switched off and on.
Creative Embroidering
169