Embroidery Preparation
> Tap «Presser Foot Indicator/Presser Foot Selection».
> To display all suitable presser feet for the selected embroidery design, tap «Optional Presser Feet».
> Select the fitted embroidery foot.
13.4 Needle and Stitch Plate
Inserting the Embroidery Needle
Embroidery needles of the type 130/705 H-SUK provide a larger eye and are slightly rounded. This avoids
thread abrasion when using Rayon- and cotton embroidery thread. Depending on the embroidery thread
use a size No. 70-SUK to No. 90-SUK needle.
> Raise the needle.
> Switch off the machine.
> Remove the fitted foot.
> Loosen the fixing screw of the needle using the screwdriver gray Torx.
> Pull the needle down.
> Hold the new needle with the flat side to the back.
> Insert the needle as far as it will go.
> Tighten the needle clamp using the gray Torx screwdriver.
Selecting the Embroidery Needle in the User Interface
After changing the needle, you can check whether this can be used with the selected stitch plate.
> Tap «Needle Selection».
138