Ariens Sno-Thro Platinum Series Service Manual page 66

See Figure 166.
8. Remove axle.
IMPORTANT: Model 921052: Be aware of flat steel washer
on axle.
9. Loosen, but DO NOT remove hardware securing axle
mount plates to carriage side plates. See Figure 167.
IMPORTANT: Loosen mount plates on both sides of unit.
Figure 164
Figure 165
10. Remove sleeve bushing between bearings on frame
and carriage side plate. See Figure 168.
11. Remove hardware retaining bearing(s) and remove
bearing(s).
IMPORTANT: Bearing plate is not a wear item and does
not need replacement unless damaged.
2
1
1. Bearing
2. Bearing Plate
EN – 64
Figure 166
Figure 167