Assemble Gearcase - Ariens Sno-Thro Platinum Series Service Manual

14. Remove seals and flange bushings from gearcase.
See Figure 145.
Figure 143

Assemble Gearcase

See Figure 146.
1. Press rear seal into gearcase until flush with gearcase
exterior.
IMPORTANT: DO NOT press right seal into gearcase.
2. Reinstall right and rear flange bushings.
1
1. Seal
2. Flange Bushing
See Figure 147.
IMPORTANT: Gear is symmetrical and may be installed in
any orientation.
3. Install gear.
EN – 56
2
2
Figure 144
Figure 145