Replacing The Rtc Battery; Keyboard; Removing The Keyboard - Toshiba Infinia 7130 Series Maintenance Manual

Replacing the RTC Battery

To install an RTC battery, perform the following procedure and refer to Figure 4-31.
1. Align the battery with the socket at BT9E1 on the system board, ensuring that the
positive side of the battery is up. Gently press down on the battery until it snaps in
place.
2. Set the computer upright.
3. Replace the computer's right-side panel (refer to section 4.2.2.), as viewed from the
rear.
4. Connect the power cord and all external cables to the computer and turn on the power.

Keyboard

This section covers the removal and replacement of the keyboard.

Removing the Keyboard

To remove the keyboard, turn off power to the computer and disconnect the keyboard cable
connector from the keyboard port (color-coded magenta) in the rear of the computer. See
Figure 4-32.
Infinia™ Series Maintenance Manual --------------------------------------------------------- 4-158
Figure 4-31 Removing and Replacing the Battery