Hold And Cancel A Conference - AT&T SB67020 User Manual

Hold and Cancel a Conference

The figures below show Call Appearance mode, but the procedure is the same in Line Appearance mode.
To put a conference on hold:

0:15
2
9-1-732-555-7318
Figure 49. Held Conference
To cancel a conference:

0:15
9-1-732-555-7318 2
Drop EndConf
Figure 50. Conference
Call Management
Synapse SB67020 Deskset User's Guide
When you are participating in a conference call, you can put both calls on hold by pressing
HOLD. The other callers can continue communicating with each other. The held conference
icon, as shown in Figure 49, designates a held conference.
is unavailable during an active call if you have another conference on hold.
A conference is automatically put on hold when you:
Press an available Call Appearance or Line Appearance key to start a new call.

Answer an incoming call.

Press a Call Appearance or Line Appearance key to take the conference call off hold.
From the Conference screen shown in Figure 50, you can press:
to end the conference. Both calls hang up and the system returns to whatever

Call Appearance or Line Appearance you were on before the conference call.
The or navigation key (Call Appearance mode) or press the Line Appearance key

(Line Appearance mode) to display the call you want to end, and then press
The other call remains active.
53
.