Table of Contents
Advertisement
7. Fixing the hose and wire.
Make the hose through the back of bowl, pull out from the
hole on the top of the bowl, then connect to the inlet of the
bidet seat.
Make the wire through the hole on the top on the bowl, pull
out from the back of the bowl, then fix into the power box
on the wall.
8. Make sure the hose and wire fixed by request, then turn on
the electricity supply and water supply.
Pre-install the bowl (The installation instruction of in-wall-
tank for reference). Need arrange the hose and wire, avoid
pressing and breaking.
Then make sure the all system work well.
1354002-T01-C
7.
Fig.#9
9
8.
Fig.#10
10
-6-
(
)
( )
( )
Advertisement
Table of Contents
