Kohler K-22250T-130 Installation Instructions Manual page 30

5. Push aside the pivot snaps of the big flush and small flush
towards upper right to make the lever and pivot apart. Hold
bracket top by hand and then lift up to unlock the bracket.
Note: Push aside the pivot snaps of the big flush and small
flush towards lower left to fix back the bracket. Lock the snap.
5.
6. Open/close water supply
Rotate valve switch to open/close water supply as shown.
6.
7. Loose filter nut as shown, then take water inlet valve out.
7.
8. Loose filter nut as shown, then take water inlet valve out
for cleaning or adjusting.
8.
9. Hold fastener by hand as shown, pull the top of fastener
along the direction of arrow. Then remove fastener.
9.
1288805-T01-B
Snap (Locked)
(
Lever Snap
Valve
On
Off
Nut
Loose
Filter
Water Inlet Valve
Fastener
-22-
)
Tighten
Fastener