Table of Contents
Advertisement
10. Pull discharge valve along the arrow direction as shown
to remove discharge valve.
10.
11. Remove discharge valve as shown and then take valve
out for cleaning.
11.
A. Wash Filtration Net
Close corner valve first, then loosen and take out the
tighten nut, and wash the waste on filtration net with clean
water. then reset the tighten nut to the original position.
A.
B. Adjust Inlet Valve
Hoist and reduce the water level in the tank by adjusting
the control pole. Turn the control pole counterclockwise to
lower down the floating box and reduce the water level of
the tank .turn the control pole clockwise to hoist the
floating box and increase the water level in the tank.
B.
1288805-T01-B
Filter
Inlet Valve
-23-
Outlet Valve
Outlet Valve
Filtration Net
Tighten
Locknut
Loosen
Control Pole
Floating Box
Advertisement
Table of Contents
