Advertisement
Quick Links
BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
OVE WF Toilet (HT100 MEC IWT).....................K-25217T-S2
Includes OVE Wall Faced PAN .......................K-19965T-2
Includes ODEON In-Wall Tank
without Iron Rack.........................K-6286T-VES2
Includes Seat........................................................K-2552A
Includes P trap .....................................................1138552
Includes S trap(Optional)......................................1241939
OVE WF Toilet (BEAM M FV)..........................K-22962T-GS2
Includes Bowl .............................................K-21857T-GS2
Includes BEAM Manual Toilet/Squat
Flush Valve ......................................K-77682K-G
Includes Seat........................................................K-2552A
OVE WF Toilet (BEAM SR D/CP) .................K-22960T-CPS2
Includes Bowl...........................................K-22963T-DPS2
Includes BEAM Toilet Sensor (DC) ..............K-30947T-CP
Includes Seat........................................................K-2552A
OVE WF Toilet (BEAM SR D/BN) .................K-22960T-BNS2
Includes Bowl...........................................K-22963T-DNS2
Includes BEAM Toilet Sensor (DC) ..............K-30947T-BN
Includes Seat........................................................K-2552A
OVE WF Toilet (BEAM SR A/CP)..................K-22961T-CPS2
Includes Bowl ...........................................K-22963T-APS2
Includes BEAM Toilet Sensor (AC) ..............K-30948T-CP
Includes Seat........................................................K-2552A
OVE WF Toilet (BEAM SR A/BN)..................K-22961T-BNS2
Includes Bowl...........................................K-22963T-ANS2
Includes BEAM Toilet Sensor (AC) ..............K-30948T-BN
Includes Seat........................................................K-2552A
1267055-T01-D
KOHLER CHINA INVESTMENT CO., LTD
JING'AN DISTRICT, SHANGHAI, PRC
(
)
VITREOUS CHINA FLOOR STANDING TOILET
K-25217T-S2/K-22962T-GS2/K-22960T-CPS2
K-22960T-BNS2/K-22961T-CPS2/K-22961T-BNS2
·
·
·
·
(
..............................................................K-19965T-2
(
) ...................................................K-6286T-VES2
...................................................................K-2552A
P
.................................................................1138552
S
(
) .......................................................1241939
(
.........................................................K-21857T-GS2
..........................................................K-77682K-G
...................................................................K-2552A
(
.......................................................K-22963T-DPS2
.........................................K-30947T-CP
...................................................................K-2552A
(
.......................................................K-22963T-DNS2
.........................................K-30947T-BN
...................................................................K-2552A
(
.......................................................K-22963T-APS2
.........................................K-30948T-CP
...................................................................K-2552A
(
.......................................................K-22963T-ANS2
.........................................K-30948T-BN
...................................................................K-2552A
NO.158, JIANG CHANG SAN ROAD,
POST CODE: 200436
158
200436
©
Copyright Kohler China Investment Co., Ltd. 2018
-1-
©
OVE
INSTALLATION INSTRUCTIONS
100
)..............K-25217T-S2
) .................K-22962T-GS2
,
) ..............K-22960T-CPS2
,
/
) ..K-22960T-BNS2
,
) ..............K-22961T-CPS2
,
/
) ..K-22961T-BNS2
-
2018
Advertisement
Related Manuals for Kohler OVE K-25217T-S2
Summary of Contents for Kohler OVE K-25217T-S2
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
- Page 2 Straight pipe coupling · · Connection packing ROUGHING-IN Reference Value Unit: mm Finished Wall Finished Wall Front of Bowl 1241939 S-Trap(Optional) Inlet Outlet Inlet Outlet Floor Fixings Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. 1267055-T01-D...
-
Page 3: Installation
INSTALLATION 1. Install Flushing Mechanism 1-1. Install The Tank 1-1. 1) Turn the water supply off before installing the new toilet. 2) Install the concealed tank system in wall before decorating the wall. 3) Install the tank system per tank's installation instructions. 4) Refer to installation instructions of in-wall tank for SKU of faceplate. - Page 4 4a. Position brackets as shown on the template and install the bracket. Fig.#4a 4b. Fit flush pipe connector and gasket to the flush pipe inlet on the toilet. Fit the waste pipe connector and gasket to the waste pipe outlet on the toilet. P-Trap S-Trap Gasket...
- Page 5 6. Eliminate unwanted part of the inlet pipe according to the marks of reserved space ,and rasp a smooth surface with files. Inlet Pipe Reserved Space Drainage Pipe Fig.#6 7. Apply mild soap and water around the gasket. Position the bowl over the floor fixings and connect the waste pipe.
- Page 6 CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.
-
Page 7: Before You Begin
All information in these instructions is based upon the 本说明书所含一切材料，均以印刷时所有的最新产品为准。 latest product information available at the time of 科勒中国公司保留随时更改产品特性、包装或供应情况的权 publication. Kohler China reserves the right to make 利，恕不另行通知。 changes in product characteristics, packaging, or availability at any time without notice. - Page 8 Note: 1. The sensing distance in the table is measured with a 30cm X 30cm 注意： 1. 30 30 cm white or black board as the reflecting surface. 2. The user may set the amount of water per flush according to the specifications of the specific toilet and water pressure.
- Page 9 尺寸图 ROUGHING-IN UNIT: mm K-4350 K-4349 单位：毫米 K-4368 K-4367 G1-1/2 G1-1/2 G1-1/2 SPUD G1-1/2 管接头 G1-1/2 SPUD G1-1/2 管接头 CL OF OUTLET CL OF OUTLET 排污管中心线 排污管中心线 Table of installation positions for toilets (Used with K-4350, K-4368, K-4349, K-4367) 座便器安装位置（配 K-4350,K-4368,K-4349,K-4367 ) K-4330 K-8750 G1-1/2...
- Page 10 CL OF OUTLET 排污管中心线 蹲便器安装位置 Table of installation positions for squats L 730 L 760 L 790 L 820 L 850 H 670 H 700 H 730 H 760 H 790 Notice: a. To ensure sensing effect, the dimensions 注意 为保证感应效果，L、H安装对应尺寸需严格...
- Page 11 安装步骤 INSTALLATION Determine the installation location per rough-in dimensions and the table of installation position.Chisel out a slot and install the supply tubes.Then flush the supply tubes. The depth of the slot is not less than 110 mm, see the figure to the right for rough-in dimension requirement.
- Page 12 注意: 因为感应器的安装位置将对感应器的工作 Notice: a. Because the installation position of the 产生直接影响，要求放置后经测量确认感 sensor will affect directly to the future 应器位置准确无误后再固定。 operation of the sensor, you are recommended to confirm the correction position of the sensor after its placement and fix it. 不要将进出水方向弄错。...
- Page 13 Drive the flushing unit with manually operation button. Tiles 瓷砖 Once it is confirmed that there is no leakage after the connection of supply tube, put the manually operation to its original place. Mount the slurry mold onto the valve Valve Box box and apply slurry into the crevice around the valve 暗盒...
- Page 14 Don t connect to power supply while installing the cover. Connect the solenoid valve connector on the control box Solenoid V alve Connector with the corresponding cords of the solenoid valve. 电磁阀接插件（二线） Install the sensor cover with control box as shown by the figure: a.
- Page 15 安装面板后，观察面板是否端正及其中心线是否与座/蹲便器 After installing the sensor cover, observe the cover if it is 在一条中心线上，如有偏差，取下面板，松开固定架的锁定螺 upright and its centerline is aligned with that of the toilet 钉，调节固定架使其端正。调完后锁紧螺钉并重新装好面板。 and squat. If any deviation occurs, remove the cover and loosen the locking screws of the fixed bracket. Adjust the fixed bracket for correctness.
- Page 16 USER S GUIDE USER S GUIDE 使用说明 Automatic Adjustment of Sensing Distance 自动调节感应范围 The accuracy of this section s steps will affect 本节操作步骤准确与否将影响感应效果。 the sensing performance. The sensing distance of this product is set at within 85cm 本产品出厂时，感应距离设定为距感应窗口沿发射角度方向 away from the sensing window along the direction of 85cm 以内（以...
- Page 17 4. Manual Flushing This system can have a good sense toward most of the clothes. However, it may have abnormal sense to a very small number of clothes. If this occurs, you may use the mode of manual flushing. Notice: a.
- Page 18 6. Replacement of Batteries(only for K-30947T/K-30951T) 螺钉 When the power in the batteries will be exhausted and the Screws indicator in the sensing window continues flashing, the indicator flash every 6 seconds and the sensor will work about one week. The indicator flush two times every 6 seconds, the sensor will not work until new batteries are supplied.
-
Page 19: Maintenance
维护保养 MAINTENANCE 修理座便器/蹲便器 Toilet & Squat Repair When repairing, you don t have to dismount the sensor. 修理座便器/蹲便器时，不必拆下感应器，只需用电工胶布粘 Cover the sensing window with tape and work with ease. 住感应窗口，您便可放心修理设备。 注意： 不要用强力胶布，因为粘痕会难以清除，而产 Notice Don't use very adhesive tape in case the scar 生误动作。... -
Page 20: Troubleshooting
TROUBLESHOOTING Please make following checks before repair: Symptoms Probable causes Corrective actions 1. No power or mistake connected. 1. Check the power connect. 2. Ther e is an object within the sensing distance. 2. Remov e the object or reduce the sensing No flushing distance. - Page 21 IMPORTANT CONSUMER INFORMATION 用户须知 Consumer Responsibilities 用户责任 请勿敲击感应窗口。 1. Do not attack the sensor. 感应器为电子器具，请勿直接用水冲洗。 2. Do not directly flush the sensor with water. The sensor is an electronic instrument. 3. Do not let sunlight or other light source enter or be 避免阳光或其他光源直接或反射进入感应窗口。...
- Page 22 产品中有害物质含量的说明 回收提示 本产品超过使用期限或经过维修无法正常使用后，不应随意丢弃，请交由有废弃电器电子产品处理资质的 企业处理，正确的处理方法请查阅国家或当地有关废旧电器电子产品处理的规定。 有害物质统计表 有害物质名称 部件名称 六价铬 多溴二苯醚 多溴联苯 铅(Pb） 镉（Cd） 汞（Hg） (Cr(VI)） （PBDE） （PBB） × ○ ○ ○ ○ ○ 外壳组件 ○ ○ ○ ○ × ○ 阀体组件 ○ × ○ ○ ○ ○ 控制盒组件 ○ ○ ○ ○...
- Page 23 :Indicate only partial product series contains this substance. Note: the information provided is based on the supplier data and Kohler inspection results. The product is designed not to hurt the environment. Under current technology, all hazardous materials have been used in the smallest amounts possible. Kohler will strive to reduce the use of these hazardous materials used in this product.