Chart Layers - Garmin ECHOMAP ULTRA Series Owner's Manual

Chart Layers

You can turn on and off chart layers and customize features of the charts. Each setting is specific to the chart
or chart view being used.
NOTE: Not all settings apply to all charts and chartplotter models. Some options require premium maps or
connected accessories.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present
location. If you make changes to those settings, the changes will not impact the chart view.
From a chart, select Menu > Layers.
Chart: Shows and hides chart-related items
My Vessel: Shows and hides items relating to the boat
User Data: Shows and hides user data, such as waypoints, boundaries, and tracks, and opens user data lists
(User Data Layer Settings,
Other Vessels: Adjusts how other vessels are shown
Water: Shows and hides depth items
Quickdraw Contours: Shows and hides Garmin Quickdraw Contours data
page 28).
Chart Layer Settings
From a chart, select Menu > Layers > Chart.
Satellite Photos: Shows high-resolution satellite images on the land or on both land and sea portions of the
Navigation chart, when certain premium maps are used
page 16).
NOTE: This setting must be enabled to view Standard Mapping charts.
Tides & Currents: Shows current station indicators and tide station indicators on the chart and enables the tides
and current slider, which sets the time for which tides and currents are reported on the map.
Land POIs: Shows points of interest on land.
Navaid: Shows navigational aids, such as ATONs and flashing lights, on the chart. Allows you to select NOAA or
IALA navaid type.
Service Points: Shows locations for marine services.
Depth: Adjusts the items on the depth layer
Restricted Areas: Shows information about restricted areas on the chart.
Photo Points: Shows camera icons for aerial photos
My Vessel Layer Settings
From a chart, select Menu > Layers > My Vessel.
Heading Line: Shows and adjusts the heading line, which is a line drawn on the map from the bow of the boat in
the direction of travel
Laylines: Adjusts the laylines, when in sailing mode
Roses: Allows you to display roses on the chart. Wind roses show a visual representation of the wind angle
or direction provided by the connected wind sensor. The compass rose indicates the compass direction
oriented to the heading of the boat.
Vessel Icon: Sets the icon that represents your present location on the chart.
22
(Chart Layer Settings,
page 23).
(Water Layer Settings,
(Water Layer Settings,
(Setting the Heading Line and Angle Markers,
page 22).
(My Vessel Layer Settings,
(Other Vessels Layer Settings,
page 24).
(Garmin Quickdraw Contours Settings,
(Showing Satellite Imagery on the Navigation Chart,
page 24).
(Viewing Aerial Photos of Landmarks,
page 14).
(Laylines Settings, page 23).
page 22).
page 23).
page 17).
Charts and 3D Chart Views