Adjusting The Volume; Enabling And Disabling Zones; Muting The Media Volume; Vhf Radio - Garmin ECHOMAP ULTRA Series Owner's Manual

Adjusting the Volume

Enabling and Disabling Zones

If you have wired your vessel's speakers into zones, you can enable needed zones and disable unused zones.
1 From the media screen, select Menu > Audio Levels > Enable/Disable Zones.
2 Select a zone.

Muting the Media Volume

1 From the media screen, select .
2 If necessary, select Select Position.

VHF Radio

NOTE: These features are available on some stereos with a VHF receiver.

Scanning VHF Channels

Before you can scan VHF channels, you must set the source to VHF.
You can monitor VHF channels saved as presets for activity and automatically switch to an active channel.
From the VHF media screen, select Menu > Scan.

Adjusting the VHF Squelch

NOTE: This feature is available on some stereos with a VHF receiver.
1 From the VHF source page, select Menu > Squelch.
2 Use the slider bar to adjust the VHF squelch.

Radio

To listen to AM or FM radio, you must have a suitable marine AM/FM antenna properly connected to the stereo
and be within range of a broadcasting station. You cannot connect an AM/FM antenna to the remote control.
You must connect an AM/FM antenna to the stereo you are controlling with the remote control. For instructions
on connecting an AM/FM antenna, see the stereo installation instructions.
To listen to SiriusXM radio, you must have the appropriate equipment and subscriptions (SiriusXM Satellite
®
Radio, page 98). For instructions on connecting a SiriusXM Connect Vehicle Tuner, see the stereo installation
instructions. For more detailed information on SiriusXM features, see the stereo owner's manual.
To listen to DAB stations, you must have the appropriate equipment (DAB Playback, page 97). For instructions
on connecting a DAB adapter and antenna, see the installation instructions provided with your adapter and
antenna. For more detailed information on DAB features, see the stereo owner's manual.

Setting the Tuner Region

1 From the media screen, select Menu > Installation > Tuner Region.
2 Select an option.

Changing the Radio Station

1 From the media screen, select an applicable source, such as FM.
2 Select or to tune to a station.
96 Media Player