System Alarms; Sonar Alarms; Setting The Fuel Alarm - Garmin ECHOMAP ULTRA Series Owner's Manual

System Alarms

Select Settings > Alarms > System.
Device Voltage: Sets an alarm to sound when the battery reaches a specified low voltage.
GPS Accuracy: Sets an alarm to sound when the GPS location accuracy falls outside the user-defined value.

Sonar Alarms

The sonar alarms feature is a tool for situational awareness only and may not prevent grounding in all
circumstances. It is your obligation to ensure safe operation of the vessel.
The shallow water alarm feature is a tool for situational awareness only and may not prevent groundings in all
circumstances. It is your obligation to ensure safe operation of the vessel.
The Beeper setting must be turned on to make alarms audible
audible alarms could lead to injury or property damage.
NOTE: Not all options are available on all transducers.
Select Settings > Alarms > Sonar.
Shallow Water: Sets an alarm to sound when the depth is less than the specified value.
Deep Water: Sets an alarm to sound when the depth is greater than the specified value.
FrontVü Alarm: Sets an alarm to sound when the depth in front of the vessel is less than the specified value,
which can help you avoid running aground
only with Panoptix FrontVü transducers.
Water Temp.: Sets an alarm to sound when the transducer reports a temperature that is 2°F (1.1°C) above or
below the specified temperature.
Fish: Sets an alarm to sound when the device detects a suspended target.
• sets the alarm to sound when fish of all sizes are detected.
• sets the alarm to sound only when medium or large fish are detected.
• sets the alarm to sound only when large fish are detected.

Setting the Fuel Alarm

The Beeper setting must be turned on to make alarms audible
audible alarms could lead to injury or property damage.
Before you can set a fuel level alarm, you must connect a compatible fuel flow sensor to the chartplotter.
You can set an alarm to sound when the total amount of remaining onboard fuel reaches the level you specify.
1 Select Settings > Alarms > Fuel > Fuel Alarm > On.
2 Enter the remaining amount of fuel that triggers the alarm, and select Done.
Device Configuration
WARNING
CAUTION
(System Settings,
(Setting the FrontVü Depth Alarm,
CAUTION
(System Settings,
page 101). Failure to set
page 70). This alarm is available
page 101). Failure to set
107