Selecting A Dsc Channel; Making An Individual Routine Call; Making An Individual Routine Call To An Ais Target; Media Player - Garmin ECHOMAP ULTRA Series Owner's Manual

Selecting a DSC Channel

NOTE: The selection of a DSC channel is limited to those channels that are available in all frequency bands. The
default channel is 72. If you select a different channel, the chartplotter uses that channel for subsequent calls
until you call using another channel.
1 Select Nav Info > Other Vessels > DSC List.
2 Select a vessel or a station to call.
3 Select Review > Call with Radio > Channel.
4 Select an available channel.

Making an Individual Routine Call

NOTE: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed, the
radio will not receive call information.
1 Select Nav Info > Other Vessels > DSC List.
2 Select a vessel or a station to call.
3 Select Review > Call with Radio.
4 If necessary, select Channel, and select a new channel.
5 Select Send.
The chartplotter sends information about the call to the radio.
6 On your Garmin VHF radio, complete the call.

Making an Individual Routine Call to an AIS Target

1 From a chart or 3D chart view, select an AIS target.
2 Select AIS Vessel > Call with Radio.
3 If necessary, select Channel, and select a new channel.
4 Select Send.
The chartplotter sends information about the call to the radio.
5 On your Garmin VHF radio, complete the call.
If you have a compatible stereo or stereos connected to the chartplotter, you can control the audio using the
media player on the chartplotter:
• If you have a Fusion-Link
Network, you can control the stereo using the chartplotter. The chartplotter should automatically detect the
stereo.
• If you have multiple Fusion
control the networked stereos and groups using the chartplotter. As long as you have one of the networked
Fusion stereos connected to the NMEA 2000 network or the Garmin Marine Network, the chartplotter should
automatically detect the stereos.
• If you have a compatible third-party stereo connected to the NMEA 2000 network, you may be able to control
the stereo using the chartplotter.
NOTE: Not all features are available on all connected stereos.
NOTE: You can play media only from sources that are connected to the stereo.

Opening the Media Player

Before you can open the media player, you must connect a compatible device to the chartplotter.
Select Media.
94

Media Player

compatible stereo connected to the NMEA 2000 network or the Garmin Marine
™
® stereos connected to one another using Fusion PartyBus ™ networking, you can
Media Player