Data Speed - Yaesu FTM-500DR Advance Manual

MAIN BAND
SUB BAND
THIS BAND
OTHER BAND Setting this menu item, fixes DATA operation to the band dis-

71 DATA SPEED

Set the baud rate of the APRS (internal modem), and the data communication (when
using the DATA jack at the back of the main body).
1. Press and hold the FUNC knob  [71 DATA SPEED]  Press the FUNC knob
The screen for the detailed settings will be displayed.
APRS
Sets the APRS packet communication speed.
1. Rotate the FUNC knob to select [APRS] then press the FUNC knob.
2. Rotate the FUNC to select the APRS communication speed, then press the FUNC
knob.
The setting switches as follows:
1200 bps / 9600 bps
DATA
Sets the APRS data communication speed.
1. Rotate the FUNC knob to select [DATA] then press the FUNC knob.
2. Rotate the FUNC to select the data communication speed, then press the FUNC
knob.
The setting switches as follows:
1200 bps / 9600 bps
Always operate on the Main Band (upper region of the screen).
Always operate on the Sub Band (lower area of the screen).
Setting this Menu item, fixes DATA operation to the Band dis-
played at the top of the screen. By pressing the [
upper and lower bands are exchanged. The DATA operation
Band is also exchanged, and the display of this setting value
changes to "OTHER BAND".
played at the bottom of the screen. By pressing the [
the upper and lower bands are exchanged. The DATA oper-
ation Band is also exchanged, and the display of this setting
value changes to "THIS BAND".
64
] key, the
] key,