Memory; Home Ch; Memory List; Memory List Mode - Yaesu FTM-500DR Advance Manual

19 HOME CH

Recalls the home channel of the current band.
1. Press and hold the FUNC knob  [19 HOME CH]  Press the FUNC knob
NOTE: This item is registered in the custom function menu by factory setting.

20 MEMORY LIST

Displays the Memory channel list screen.
1. Press and hold the FUNC knob  [20 MEMORY LIST]  Press the FUNC knob

21 MEMORY LIST MODE

Set the memory channel list to be displayed by rotating the DIAL knob, confirming the
contents of the memory, and then press DIAL knob to recall the memory channel.
1. Press and hold the FUNC knob  [21 MEMORY LIST MODE]  Press the FUNC knob
Refer to the Operating Manual for details.

22 PMG

Cancel the registration of all PMG channels.
1. Press and hold the FUNC knob  [20 PMG]  Press the FUNC knob
The parameter settings screen appears.
PMG TIMER
Scan resume time after there is no signal when receiving in PMG mode simultaneously.
1. Rotate the FUNC knob to select [PMG TIMER] then Press the FUNC knob.
2. Rotate the FUNC knob to select the desired setting.
1sec / 2sec / 3sec
PMG CLEAR
Cancel the registration of all PMG channels..
1. Rotate the FUNC knob to select [PMG CLEAR] then Press the FUNC knob.
The confirmation screen will be displayed.
2. Rotate the FUNC knob to select [OK], then press the FUNC knob.

MEMORY

51