Data; Com Port - Yaesu FTM-500DR Advance Manual

69 COM PORT

Set the communication speed and parameters for the COM port DATA jack on the rear
panel of the transceiver.
1. Press and hold the FUNC knob key  [69 COM PORT]  Press the FUNC knob
The parameter settings screen appears.
SPEED
Setting the communication speed.
1. Rotate the FUNC knob to select [SPEED] then Press the FUNC knob.
2. Rotate the FUNC to select the desired communication speed then press the FUNC
knob.
The setting switches as follows:
4800bps / 9600bps / 19200bps / 38400bps / 57600bps
OUTPUT
Select the function of COM port output.
1. Rotate the FUNC knob to select [OUTPUT] then Press the FUNC knob.
2. Rotate the FUNC to select the data output type then press the FUNC knob.
OFF
GPS OUT
PACKET
WAYPOINT Outputs the APRS packet WAYPOINT beacon information of other
WP FORMAT
Set the number of digits for CALLSIGN information of APRS BEACON stations,
attached to various data, when WAYPOINT is selected for OUTPUT.
1. Rotate the FUNC knob to select [WP FORMAT] then press the FUNC knob.
2. Press the FUNC to select the number of digits of the APRS beacon station call
sign information which is added to each data.
NMEA 9
NEMA 8
NMEA 7
NMEA 6
WP FILTER
Sets the type of beacon to be output when "WAYPOINT" is selected in "OUTPUT".
1. Rotate the FUNC knob to select [WP FILTER] then press the FUNC knob.
2. Rotate the FUNC to select the beacon type you want to output then press the
DIAL knob.
The COM port is deactivated.
Outputs the GPS receiver satellite data.
Outputs the AX.25 packet data from the internal modem.
stations acquired from the received data.
Displays the last 9 digits of the call sign (Example: JA1YOE-14 is
output as "JA1YOE-14").
Displays the last 8 digits of the call sign (Example: JA1YOE-14 is
shortened to "A1YOE-14").
Displays the last 7 digits of the call sign (Example: JA1YOE-14 is
shortened to "1YOE-14").
Displays the last 6 digits of the call sign (Example: JA1YOE-14 is
shortened to "YOE-14").

DATA

62